Had to unscrew mounting bolt out of the engine and then used Vise Grip to hold bolt to undo the nut that held the starter coil/gas tank to gether. Only way to get a good hold with vise grips on the right side was on the threaded part that screwed into the engine. The left side did the same thing but was able to get apart without damage. T
... Read morehere are three bolts in a triangular pattern to hold the gas tank and rope coil onto the mower. Must have got one of the two parts out of alignment when reassembly after replacing a Governor return spring on Honda HRX 217 mower. It caused the nut to grip tighter than normal unscrewing the bolt out of then engine. Got my bolt from E replacement fast and was an OEM Honda part that worked perfect. Had the mower tank off and replaced the part and mower running in no time.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11895615
Manufacturer Part Number: 90043-Z8B-000
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(VIN_MZCG-8400001)_WW_8.gif "Part Location Diagram of 90043-Z8B-000 Honda Bolt, Stud (Fan Cover)")
(VIN_MZCG-8400001)_WW_8.gif "Part Location Diagram of 90043-Z8B-000 Honda Bolt, Stud (Fan Cover)")
