Part Location Diagram of 99101-ZH8-0720 Honda Jet- Main - #72
See part D-25 in the diagram
( Grid squares measure 1x1 inch )

Jet- Main - #72 99101-ZH8-0720

Manufactured by:
Honda
ERP Number:
ERP10038264
Part Number:
99101-ZH8-0720
Original Equipment Manufacturer ?
  Works with your model  F401K2!
$10.36
Special Order

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   F401K2!

Troubleshooting

This part works with the following brands:
  • Honda
This part works with the following products:
  • Engine
  • Generator
  • Tiller
  • Snow Blower
  • Water Pump

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Carburetor of my Honda GX200 engine was originally jetted for operation below 5000 ft. I moved the equipment to a location at 6900 ft above sea level.

Rob from Flagstaff, Arizona

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
99101-ZH8-0720
1. Turned the fuel shutoff valve to the \"closed\" position and drained the gas out of the fuel bowl.
2. Removed the fuel bowl securing nut and removed the fuel bowl.
3. Using a flat blade screwdriver, I unscrewed to original #75 main jet and replaced it with the new #72 main jet (one size smaller).
4. Re-installed the f uel bowl.
5. Turned the fuel shutoff valve to the \"open\" position and checked for leaks.
6. Started engine and adjusted idle mixture needle and idle speed.
Did you find this story helpful?
Thank you for voting!
  • 1