10022457-1-M-Honda-90206-ZM3-000-Nut- Tappet Adjusting

( Grid squares measure 1x1 inch )

10022457-1-S-Honda-90206-ZM3-000-Nut- Tappet Adjusting

10022457-2-S-Honda-90206-ZM3-000-Nut- Tappet Adjusting

10022457-3-S-Honda-90206-ZM3-000-Nut- Tappet Adjusting

10022457-1-S-Honda-90206-ZM3-000-Nut- Tappet Adjusting 360 view

Nut- Tappet Adjusting 90206-ZM3-000

Manufactured by:: Honda
ERP Number:: ERP10022457
Part Number:: 90206-ZM3-000

Works with your model GX25!

$5.95

Delivers in 3-5 Business Days!

Easy

30 - 60 mins

(2 rated repairs) ?

Works with your model GX25!

Jump to:

Questions & Answers Repair Instructions

Troubleshooting

This part works with the following brands:

Honda

This part works with the following products:

Engine
Trimmer
Tiller
Water Pump

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

30 - 60 mins

(2 rated repairs) ?

< Prev
1
Next >

Sort by:

the tappet nut had come off the tappet

Ralph from Jamestown, Indiana

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Socket set, Wrench (Adjustable), Wrench set
Parts Used:: 90206-ZM3-000

installed nut and adjusted the valves

Did you find this story helpful?

Tappet cracked

Daniel from Copperas Cove, Texas

0 of 1 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers
Parts Used:: 90206-ZM3-000, 90012-333-000, 14461-ZL8-000

I had slip the adjusting bolt o and put the nut to hold it on to the tappet. I slid the pin in place to hold the tappet. Turn the engine to get the piston on top and set the tappet to correct gap. Tighten bolt and put the head cover in place.

Did you find this story helpful?

< Prev
1
Next >