This is a genuine Echo little wonder replacement part, it is not an aftermarket imitation part. The part is sourced from the original manufacturer to be used with two stroke engines. This plastic tank is used to store fuel on board of the small engine. The fuel tank is sold as an individual replacement part.
Troubleshooting
This part works with the following brands:
Echo
This part works with the following products:
Engine
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Purchased fuel tank, 13100511521. Tank is sourced directly from manufacturer so everything was identical to original tank except that they have increased the size of the fuel outlet hole to match their newer models.
If your making the same repair/replacement be aware that the fuel grommet being sold to match the tank (13211504920)
... Read more WILL NOT WORK, they are too small for the tank outlet. If you have already bought the wrong grommet use a short piece of 3/8\" ID X 5/8\" OD fuel line about an inch long, to stick in the hole. Your fuel grommet will fit tight inside of this line with no leaks. Make sure the 1\" piece is for fuel and made of the old fashioned nitrile rubber.
As noted by others, grommet does not fit the new tank. It is too small for the hole.
You need to find a larger grommet that does fit, or use a rubber cork with a hole in it.
1. Remove three screws holding tank to engine
2. Remove fuel hose from carburetor
3. Remove fuel cap and save. Discard old tank (with hose and
... Read more filter inside)
4. Slide clip over hose about 1/4 inch from one end
5. Insert filter into end of hose
6 Slide clip over the hose where filter is inserted
7. Slide grommet over the over end of the hose. Be sure that orientation is correct (small end towards filter. Position grommet approximately 2 inches from end of hose.
8. Insert filter end of hose into the new tank
9. Do NOT insert grommet at this time.
10. Attach tank to engine with the three screws.
11. Attach end of hoe to carburetor
12 Hold grommet against the hole in tank. Make sure that the hose is not stretched or kinked. Adjust the length of the hose until there are 2 smooth curves in it.
13 Insert grommet into the tank. Ensure that is seats completely.
14 Fill tank part way with clean fuel and tilt the engine until the grommet is covered by the fuel. Check for leaks around grommet and carburetor connection.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9887562
Manufacturer Part Number: 13100511521
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Tank or Container","title":"Tank or Container","url":"/parts/lawn-and-garden/engine/tanks-and-containers/"},{"position":2,"name":"13100511521","title":"13100511521","url":""}]
