18554469-1-M-Briggs and Stratton-26652-28260771

( Grid squares measure 1x1 inch )

18554469-1-S-Briggs and Stratton-26652-28260771

28260771 26652

Manufactured by:: Briggs and Stratton
ERP Number:: ERP18554469
Part Number:: 26652

Works with your model 14325100!

$46.34

Easy

30 - 60 mins

(3 rated repairs) ?

Works with your model 14325100!

Jump to:

Description Troubleshooting Repair Instructions Model Cross Reference

Product Description

This is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman band saws. It is an identical replacement for a missing or a faulty blade that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality blade is made of durable metal and is sold individually.

Troubleshooting

This part works with the following brands:

Craftsman

This part works with the following products:

Engine
Band Saw
Chainsaw

Part# 26652 replaces these:

26652,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

30 - 60 mins

(3 rated repairs) ?

< Prev
1
Next >

Sort by:

Cracked tires

Kevin from Muskegon, Michigan

3 of 3 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Screw drivers
Parts Used:: 26652, 69177

Remove blade, remove tires. Than replace, stretch the tires on. Easier with two people. Followed by replacing the blade and aligning it.

Did you find this story helpful?

Insert broke-blade dull

Ike from Sun City West, Arizona

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers
Parts Used:: 69156, 26652

Drop in insert--blade install is easy loosen drive pulleys install new blade, teeth pointing down tighten check tracking rock and roll good to go Thanks

Did you find this story helpful?

The band saw blade was missing, it was a gift

Jose from Vega Baja, Puerto Rico

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers
Parts Used:: 26652

1. Partly unscrewed one of the three wheels to release the tension
2. Fitted the blade around the 3 wheels
3. Readjusted the wheel to reestablish tension and adjusted the tracking

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP18554469
Manufacturer Part Number: 26652

Brand	Model Number	Description
Craftsman	113244510	Band Saw - 10-Inch Direct Drive Band Saw
Craftsman	113244512	Band Saw - 10-Inch Direct Driveband Saw
Craftsman	113244513	Band Saw - 10-Inch Band Saw
Craftsman	14320100	Engine - Craftsman 4 Cycle Gasoline Engine
Craftsman	14325100	Engine - Craftsman 4 Cycle Gasoline Engine
Craftsman	14327100	Engine - Craftsman 4 Cycle Gasoline Engine
Craftsman	14327200	Engine - Craftsman 4 Cycle Engine
Craftsman	217585240	Chainsaw - 3.5 H.p. Outboard Motor
Craftsman	217585241	Chainsaw - 3.5 H.p. Gamefisher Outboard Motor