Part Location Diagram of 26652 Briggs and Stratton 28260771
See part A-68 in the diagram
( Grid squares measure 1x1 inch )

28260771 26652

Manufactured by:
Briggs and Stratton
ERP Number:
ERP18554469
Part Number:
26652
Original Equipment Manufacturer ?
  Works with your model  14320100!
$44.73
Special Order

Easy 

30 - 60 mins 

(3 rated repairs) ?
  Works with your model   14320100!

Product Description

?

This is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman band saws. It is an identical replacement for a missing or a faulty blade that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality blade is made of durable metal and is sold individually.

Troubleshooting

This part works with the following brands:
  • Craftsman
This part works with the following products:
  • Engine
  • Band Saw
  • Chainsaw
Part# 26652 replaces these:
26652,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Cracked tires

Kevin from Muskegon, Michigan

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Parts Used:
26652, 69177
Remove blade, remove tires. Than replace, stretch the tires on. Easier with two people. Followed by replacing the blade and aligning it.
Did you find this story helpful?
Thank you for voting!

Insert broke-blade dull

Ike from Sun City West, Arizona

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
69156, 26652
Drop in insert--blade install is easy loosen drive pulleys install new blade, teeth pointing down tighten check tracking rock and roll good to go Thanks
Did you find this story helpful?
Thank you for voting!

The band saw blade was missing, it was a gift

Jose from Vega Baja, Puerto Rico

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
26652
1. Partly unscrewed one of the three wheels to release the tension
2. Fitted the blade around the 3 wheels
3. Readjusted the wheel to reestablish tension and adjusted the tracking
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18554469
Manufacturer Part Number: 26652
Brand Model Number Description
Craftsman 113244510 Band Saw - 10-Inch Direct Drive Band Saw
Craftsman 113244512 Band Saw - 10-Inch Direct Driveband Saw
Craftsman 113244513 Band Saw - 10-Inch Band Saw
Craftsman 14320100 Engine - Craftsman 4 Cycle Gasoline Engine
Craftsman 14325100 Engine - Craftsman 4 Cycle Gasoline Engine
Craftsman 14327100 Engine - Craftsman 4 Cycle Gasoline Engine
Craftsman 14327200 Engine - Craftsman 4 Cycle Engine
Craftsman 217585240 Chainsaw - 3.5 H.p. Outboard Motor
Craftsman 217585241 Chainsaw - 3.5 H.p. Gamefisher Outboard Motor