Part Location Diagram of 592673 Briggs and Stratton Rod-push
See part J-1026 in the diagram
( Grid squares measure 1x1 inch )

Rod-push 592673

Manufactured by:
Briggs and Stratton
ERP Number:
ERP9983791
Part Number:
592673
Original Equipment Manufacturer ?
  Works with your model  8560EX!
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(5 rated repairs) ?
  Works with your model   8560EX!

Product Description

?

This replacement push rod is specially designed for use on Briggs and Stratton engines. It is an authentic part supplied directly from original equipment manufacturer. The push rod is connected to the camshaft to push the exhaust valve open during the exhaust stroke. A bent rod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately. Please note, this assembly includes the (1) push rod and (1) tappet valve.

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Simplicity
  • Cub Cadet
  • Poulan
This part works with the following products:
  • Engine
  • Snow Blower
Part# 592673 replaces these:
695177, 799862,

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bent push-rod.

Robert from Port Jervis, New York

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Parts Used:
592673, 690083
Removed the valve cover then the rocker arm to check it. Removed the push rod and put in the new one along with the new adjuster nut. Brought the engine to top dead center and adjusted the valve lash to 5mm. Replaced the valve cover.
Did you find this story helpful?
Thank you for voting!

Motor turned over would not fire

tim from pleasant valley, Connecticut

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench (Adjustable)
Parts Used:
592673, 793541, 690971
Removed mouse nest, replaced push rods.
Did you find this story helpful?
Thank you for voting!

Bent Push Rod

Bob from Moseley, Virginia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
Parts Used:
592673
Removed valve cover and removed rocker.

Replaced push rod. I did not replace the tappet due to not wanting to remove the head
Did you find this story helpful?
Thank you for voting!

Bent and broken push rods

james from Onekama, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
592673, 690971
Removed valve cover and removed and replaced push rods.
Did you find this story helpful?
Thank you for voting!

Push rods bent and broken

Richard from camden, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Parts Used:
592673
Remove tapped cover
Loosen tappet adjusting nut
Remove damaged push rods
Reinstall new push rods
Remove spark plug and set piston at 1/4\" past top dead center on exhaust stroke
Tighten push rod adjusting nut to set free play gap specified by manufacturer
Pull engine over and reset piston position and c heck and or reset free play
Replace tappet cover and gasket if necessary
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9983791
Manufacturer Part Number: 592673
Brand Model Number Description
Simplicity 10560EX Snow Blower - Simplicity Snowblower Model 10560EX Parts
Simplicity 1060E Snow Blower - Simplicity Snowblower Model 1060E Parts
Simplicity 1060M Snow Blower - Simplicity Snowblower Model 1060M Parts
Briggs and Stratton 111902-0015-99 Engine - Engine
Briggs and Stratton 111902-0016-99 Engine - Engine
Briggs and Stratton 111902-0017-99 Engine - Engine
Briggs and Stratton 111902-0018-99 Engine - Engine
Briggs and Stratton 111902-0101-99 Engine - Engine
Briggs and Stratton 111902-0102-99 Engine - Engine
Briggs and Stratton 111902-0103-99 Engine - Engine
Briggs and Stratton 111902-0104-99 Engine - Engine
Briggs and Stratton 111902-0130-99 Engine - Engine
Briggs and Stratton 111902-0131-99 Engine - Engine
Briggs and Stratton 111902-0132-99 Engine - Engine
Briggs and Stratton 111902-0133-99 Engine - Engine
Briggs and Stratton 111902-0134-02 Engine - Engine
Briggs and Stratton 111902-0135-99 Engine - Engine
Briggs and Stratton 111902-0136-99 Engine - Engine
Briggs and Stratton 111902-0137-99 Engine - Engine
Briggs and Stratton 111902-0138-99 Engine - Engine
Briggs and Stratton 111902-0139-99 Engine - Engine
Briggs and Stratton 111902-0140-99 Engine - Engine
Briggs and Stratton 111902-0141-99 Engine - Engine
Briggs and Stratton 111902-0142-99 Engine - Engine
Briggs and Stratton 111902-0144-99 Engine - Engine
Briggs and Stratton 111902-0145-99 Engine - Engine
Briggs and Stratton 111902-0146-99 Engine - Engine
Briggs and Stratton 111902-0147-99 Engine - Engine
Briggs and Stratton 111902-0148-99 Engine - Engine
Briggs and Stratton 111902-0149-99 Engine - Engine