Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
9294819-1-M-Briggs and Stratton-692287-Gasket-crankcase
Part Location Diagram of 692287 Briggs and Stratton Gasket-crankcase
See part C-569 in the diagram
( Grid squares measure 1x1 inch )
9294819-1-S-Briggs and Stratton-692287-Gasket-crankcase Part Location Diagram of 692287 Briggs and Stratton Gasket-crankcase

Gasket-crankcase 692287

Manufactured by:
Briggs and Stratton
ERP Number:
ERP9294819
Part Number:
692287
Original Equipment Manufacturer ?
  Works with your model  1610!
$13.45
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

More than 2 hours 

(4 rated repairs) ?
  Works with your model   1610!

Jump to:

Description Frequently Purchased Together Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This crankcase gasket is an OEM part direct from Briggs & Stratton. The composite material gasket is made for use with many small lawn and garden engines. This item is fitted between the crankcase and crankcase cover, providing protection from friction and leakage. A wrench, screwdriver and a socket set are helpful for making the installation. The crankcase gasket is sold individually. Please refer to the specific manual for additional repair and safety instructions.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Craftsman
  • Cub Cadet
  • Toro
  • Murray
  • Simplicity
This part works with the following products:
  • Engine
  • Lawn Tractor
  • Lawn Mower
  • Generator
Part# 692287 replaces these:
270981, 272062, 272645, 692287,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

More than 2 hours 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Thrown rod and blown piston

john from camino, California

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Socket set, Wrench (Adjustable)
Parts Used:
592244, 692287, 691964, 691800, 498584, 394306, 271867S, 271189, 271868S, 222698S
Started by taken total engine apart then got the new parts and put the engine back together and then it ran.
Did you find this story helpful?
Thank you for voting!

Ran out of oil, damaged top rod bearing

Bruce from Port Orange, Florida

1 person found this instruction helpful.
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
692287, 498314, 271867S, 271868S
Pull engine, remove pulley under side, belts engine mount bolts. Disconnect cables and wire connectors. Lift engine out and put it on table with the crank case cover pointing at you. Drain oil unless you want a mess on your hands. Remove case cover and observe the rods, see nothing, then remove cylinder heads and unbolt rods observin g what direction is on your side, best to mark with a punch mark. Clean carbon from top edge of cylinder and push rod out the top, may need to push it hard to get it to come out when rings hit the top of cyl Be sure to catch the piston and rod! Look at crank journal and polish with emory cloth untill aluminum marks are polished off. Then if you want, measure the journal to get the diameter and see if it is round. Replace rod with new. Remove retainer ring on one end of rist pin and slide pin out observing what direction the rod goes in the piston, replace retainer ring be sure it is seated. Clean the inside of crank case from all polishing debris. Clean piston and install ring compressor to install the piston/rod assy back ontoo the crank journal and torque to 160 in pounds. Cover it up and reverse the steps to put it back in the mower.
Read less
Did you find this story helpful?
Thank you for voting!

Leaking oil

Gerry from Round Mountain , California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
Parts Used:
692287, 27803S
Motor must be removed from frame, turned upside down to remove sump pan, clean parts and replace gasket, then remove crankcase cover, four bolts, clean all surfaces and replace gasket, breather gasket is very easy, two bolts.
Did you find this story helpful?
Thank you for voting!

The engine was leaking oil. The fuel filter needed replaced anyway, but broke when removing.

Joseph from Youngwood, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Parts Used:
84001895, 692287, 692292, 291675S
Take crank covers off, clean parts, use engine assembly lube when putting movable parts back together, torque bolts down to specifications. The fuel filter is between two hose clamps. Slide the clamps back, take out the old fuel filter and replace. If the hose clamps are weak, replace.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9294819
Manufacturer Part Number: 692287
Brand Model Number Description
Cub Cadet 0350041U Lawn Mower - Cub Cadet Lawn Mower Model 0350041U Parts
Cub Cadet 0350042U Lawn Mower - Cub Cadet Lawn Mower Model 0350042U Parts
Briggs and Stratton 0749-01 Engine - Engine
Cub Cadet 1238 Lawn Mower - Cub Cadet Lawn Mower Model 1238/1992 Parts
Cub Cadet 132-552F100 Lawn Mower - Cub Cadet Lawn Mower Model 132-552F100/1992 (132552F100/1992, 132 552F100/1992) Parts
Cub Cadet 135-392-100 Lawn Mower - Cub Cadet Lawn Mower Model 135-392-100 (135392100, 135 392 100) Parts
Cub Cadet 135-392-399 Lawn Mower - Cub Cadet Lawn Mower Model 135-392-399 (135392399, 135 392 399) Parts
Cub Cadet 135-393-100 Lawn Mower - Cub Cadet Lawn Mower Model 135-393-100 (135393100, 135 393 100) Parts
Cub Cadet 135-393-399 Lawn Mower - Cub Cadet Lawn Mower Model 135-393-399 (135393399, 135 393 399) Parts
Cub Cadet 136-392-100 Lawn Mower - Cub Cadet Lawn Mower Model 136-392-100 (136392100, 136 392 100) Parts
Cub Cadet 136-393-100 Lawn Mower - Cub Cadet Lawn Mower Model 136-393-100 (136393100, 136 393 100) Parts
Cub Cadet 1610 Lawn Mower - Cub Cadet Lawn Mower Model 1610 Parts
Simplicity 1691619 Lawn Mower - Simplicity Lawn Mower Model 1691619 Parts
Toro 30116 Lawn Mower - Lawn Mower
Briggs and Stratton 385020X51A Lawn Tractor - 385020x51a - Lawn Tractor (2001)
Briggs and Stratton 400417-0119-01 Engine - Engine
Briggs and Stratton 400417-1501-01 Engine - Engine
Briggs and Stratton 400417-1502-01 Engine - Engine
Briggs and Stratton 400437-0015-01 Engine - Engine
Briggs and Stratton 400437-0016-01 Engine - Engine
Briggs and Stratton 400437-0111-01 Engine - Engine
Briggs and Stratton 400437-0112-01 Engine - Engine
Briggs and Stratton 400437-0113-99 Engine - Engine
Briggs and Stratton 400437-0113-XX Engine - Horizontal Engine
Briggs and Stratton 400437-0120-01 Engine - Engine
Briggs and Stratton 400437-0121-99 Engine - Engine
Briggs and Stratton 400437-0121-XX Engine - Horizontal Engine
Briggs and Stratton 400437-0122-01 Engine - Engine
Briggs and Stratton 400437-1200-01 Engine - Engine
Briggs and Stratton 400437-1202-01 Engine - Engine
Gasket-crankcase
$ 13.45
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖