Part Location Diagram of 691993 Briggs and Stratton Tank-fuel
See part H956 in the diagram
( Grid squares measure 1x1 inch )

Tank-fuel 691993

Manufactured by:
Briggs and Stratton
ERP Number:
ERP9294765
Part Number:
691993
Original Equipment Manufacturer ?
  Works with your model  38565!
$193.54
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(5 rated repairs) ?
  Works with your model   38565!

Product Description

?

This fuel tank is a genuine OEM replacement part supplied by the original equipment manufacturer. It is commonly used in engines, shredders, and snowthrowers. This black fuel tank is made of plastic. It should be replaced if it is cracked, broken, or damaged. To replace this part, simply remove the brackets with a screwdriver. Please note the cap is included with the purchase of this part.

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Cub Cadet
  • Craftsman
  • Simplicity
  • Murray
  • Lawn Boy
This part works with the following products:
  • Engine
  • Snow Blower
  • Chipper Shredder
  • Log Splitter
  • Dethatcher
Part# 691993 replaces these:
1918646MA, 397928, 490572, 490579, 493337, 691993,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Needed new tank and shut off valve

Glenn from Stockton, Alabama

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Parts Used:
691993, 698182
Removed old gas tank brackets, then removed the old tank and installed the new one. I then installed the new fuel shut off valve.
Did you find this story helpful?
Thank you for voting!

Black plastic fuel tank cracked and leaking gas.

Carl from Eunice, New Mexico

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Parts Used:
691993
1. Removed two bolts holding gas tank to bracket.
2. Loosened two bolts holding gas tank bracket.
3. Removed gas tank.
4. Removed clamp from gas hose on fuel valve shut-off.
5. Replaced with new tank. New tank already had fuel shut-off valve attached.
Did you find this story helpful?
Thank you for voting!

Threaded outlet of fuel tank cracked, causing fuel to leak.

Ralph from DAYTON, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
691993
1 Removed fuel line from shut off valve
2 Removed screws holding tank to bracket
3 Slid tank out of bracket
4 Inspected fuel line and decided to replace
5 Placed new tank back in bracket
6 Replaced screws holding tank to bracket
7 Attached new fuel line to shut off valve
8 Measured and cut new f uel line to length and attached to carburetor
Did you find this story helpful?
Thank you for voting!

Replace fuel tank

Alex from marysville, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
691993
Remove fuel tank brackets, remove the fuel tank. Place the new fuel tank in place and install the brackets.
Did you find this story helpful?
Thank you for voting!

Fuel tank leak--Replace tank

Charles from Iredell, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
691993
Installed tank in lower bracket. Installed to screws. Installed fuel line with clamp.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9294765
Manufacturer Part Number: 691993
Brand Model Number Description
Briggs and Stratton 01149-0 Generator - Briggs & Stratton Generator Model 01149-0 (011490, 01149 0) Parts
Lawn Boy 0292A Lawn Mower - Lawnmower
Briggs and Stratton 1149-0 Generator - 5,000W 10HP Portable Generator
Craftsman 1149-0-580327112 Generator - 1149-0 - 580.327112, 5,000 Watt Craftsman
Simplicity 1691402 Engine - Simplicity Small Engine Model 1691402 Parts
Briggs and Stratton 170401-2110-01 Engine - Engine
Briggs and Stratton 170401-2301-01 Engine - Engine
Briggs and Stratton 170402-2015-01 Engine - Engine
Briggs and Stratton 170402-2015-02 Engine - Engine
Briggs and Stratton 170402-2015-03 Engine - Engine
Briggs and Stratton 170402-2020-01 Engine - Engine
Briggs and Stratton 170402-2101-01 Engine - Engine
Briggs and Stratton 170402-2102-01 Engine - Engine
Briggs and Stratton 170402-2111-01 Engine - Engine
Briggs and Stratton 170402-2133-01 Engine - Engine
Briggs and Stratton 170402-2136-01 Engine - Engine
Briggs and Stratton 170402-2139-01 Engine - Engine
Briggs and Stratton 170402-2143-01 Engine - Engine
Briggs and Stratton 170402-2146-01 Engine - Engine
Briggs and Stratton 170402-2149-01 Engine - Engine
Briggs and Stratton 170402-2151-01 Engine - Engine
Briggs and Stratton 170402-2155-01 Engine - Engine
Briggs and Stratton 170402-2159-01 Engine - Engine
Briggs and Stratton 170402-2163-01 Engine - Engine
Briggs and Stratton 170402-2215-01 Engine - Engine
Briggs and Stratton 170402-2215-02 Engine - Engine
Briggs and Stratton 170402-2215-03 Engine - Engine
Briggs and Stratton 170402-2215-04 Engine - Engine
Briggs and Stratton 170402-2220-01 Engine - Engine
Briggs and Stratton 170402-2300-01 Engine - Engine