This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.
Unclamped fuel line to drain gasoline from the tank into a catch bucket. Removed screws holding the fuel tank in place. Removed screws from metal fuel tank housing. Removed old fuel tank. Inserted new fuel tank. Replaced screws in reverse order. Clamped fuel line. Done.
Did you find this story helpful?
Thank you for voting!
Lawn mower would not start. Found crud in carb. Added fuel filter and cut off valve.
Drained fuel from fuel tank.
Removed air filter.
Marked the throttle cable position on the cable housing.
Removed the throttle cable clamp.
Removed air filter housing.
Disconnected old fuel line from tank and finished draining last bit of fuel.
Disconnected old fuel line from carb.
Determined wher
... Read moree to position cut off valve.
Cut new fuel line to go from tank to cut off valve.
Added clamps to the fuel line.
Installed new fuel line between tank and cut off valve.
Determined where to position fuel filter.
Cut new fuel line to go from the cut off valve to the fuel filter.
Added clamps to the fuel line.
Installed new fuel line between the cut off valve and the fuel filter.
Determined how much fuel line was needed to go from the fuel filter to the carb.
Cut new fuel line to fit.
Added clamps to the fuel line.
Installed the fuel line from the filter to the carb.
Re-installed the air filter housing.
Re-installed the throttle cable clamp.
Re-installed the air filter.
Refilled the gas tank.
Checked for leaks.
Primed the carb with the bulb.
Started the mower.
Checked the throttle.
Closed the fuel cut off valve.
Let mower stop when fuel ran out in carb.
- Now I can better store the mower for winter with the carb drained.
Briggs& Stratton motor 190cc on craftsman brand mower
1. Removed rope pull mechanism cover air breather. several 5/16 hex screws
2. Removed springs from carburetor choke mechanism.
3. Removed fuel line and fuel tank used 3/8 bolt to plug fuel line. Drained carb into cup.
3. Removed engine cover to have access to a
... Read moreuto choke and carburetor.
4. Removed carburetor two bolts.
5. Removed carburetor float bowl,float and needle.
6. Removed existing rubber seat below needle. used e-part number kit 398188 (see e-part diagram).
7. Reassembled all parts. added Fresh Non-Ethanol gas. Runs as good as when it was new. No more surging. No other adjustments needed. Thanks e-replacement parts!
Read less
Did you find this story helpful?
Thank you for voting!
Gas tank leaking from a crack on the bottom of the tank
Removed 2 screws and loosen 2 screws on the top cover. Then removed 4 screws holding the tank in. Loosen and remove hose. Put everything back in reverse order. The tank was drained earlier.
Did you find this story helpful?
Thank you for voting!
Need a gas filter added. Did not come with one on machine.
1. Removed the air filter.
2. Removed the air filter plate.
3. Removed the top cover.
4. Removed the gas hose, with a drip pan under the machine for gas to runoff.
5. Cut the hose, inserted the gas filter.
6. Reconnected to the machine with clips.
I watched a video online before attempting the repair. G
... Read moreave great information. Lawn mower runs like a dream now, and I am a 72 year old woman who did it herself for the first time!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9140678
Manufacturer Part Number: 791850
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
