Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
9138812-1-M-Briggs and Stratton-797622-Pin-float Hinge
Part Location Diagram of 797622 Briggs and Stratton Pin-float Hinge
See part A104 in the diagram
9138812-1-S-Briggs and Stratton-797622-Pin-float Hinge 360 view
( Grid squares measure 1x1 inch )
9138812-1-S-Briggs and Stratton-797622-Pin-float Hinge 9138812-1-S-Briggs and Stratton-797622-Pin-float Hinge 360 view
Part Location Diagram of 797622 Briggs and Stratton Pin-float Hinge

Pin-float Hinge 797622

Manufactured by:
Briggs and Stratton
ERP Number:
ERP9138812
Part Number:
797622
Original Equipment Manufacturer ?
  Works with your model  20020!
$6.32
On Order
Minimum Quantity of 2 required

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  Works with your model   20020!

Jump to:

Description Frequently Purchased Together Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This genuine OEM sourced part is specially designed for use with Briggs and Stratton engines that are commonly installed on lawn and garden equipment. The pin-float hinge is utilized to secure the float. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Refer to the diagrams for your model to ensure the correct repair procedure. Keep in mind this high-quality pin-float hinge is sold as an individual item. You will need pliers to replace this component.

Frequently Purchased Together

?
Gasket-air Cleaner
★★★★★
★★★★★
(19)
$5.95
In Stock
Minimum Quantity of 2 required

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Cub Cadet
  • Craftsman
  • Lawn Boy
  • Murray
  • MTD
  • Husqvarna
  • Poulan
This part works with the following products:
  • Engine
  • Lawn Mower
  • Pressure Washer
  • Snow Blower
  • Chipper Shredder
  • Tiller
  • Generator
  • Leaf Blower / Vacuum
Part# 797622 replaces these:
231371, 691242, 797622,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Hard to start, little power. Black smoke at start. Symptoms indicate flooded carb situation

Galen from Morrison, Illinois

19 of 19 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
797622, 692667, 398188, 398187
Suspected problem due to ethanol damage to engine not designed to use it.
1. Drained fuel tank.
2. Removed shroud, air filter assembly and disconnected fuel line. (Good time to replace air filter)
3. Removed carburetor, noting manner of attachment of throttle linkage.
4. Disassembled float bowl from carb.
5. Removed float, needle valve and needle valve seat.
6. Remove old air cleaner gasket.
7. Thoroughly cleaned carb and parts to be reused.
8. Replace needle valve seat per instructions supplied with new part.
9. Replace float and needle valve with new parts.
10. Reassembly float bowl on carb.
11. Reattach carb to engine, including reattachment of throttle linkage.
12. Reinstall fuel line. (Note: I recommend installing an in-line fuel strainer.)
13. Reinstall air filter assembly and shroud.
14. Fill fuel tank
15. Test run engine.
Engine now starts easy and has same power as before.
I try to avoid ethanol in my small engines even in those supposedly designed for it. It\'s a powerful solvent and a potential troublemaker in my experience.
Read less
Did you find this story helpful?
Thank you for voting!

Float valve stuck uv ate bracket

Elbert from Paige, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
791873, 797622, 746-0883, 693981, 497725S, 398188, 273185S, 271716
Replace cable bracket clean paint rusty parts push handle. Remove Flote bowl remove float valve clean all parts in parts cleaner mask paint bowl adjust to factory spec reassemble add fluids. Start run mow on hour make needed adjustment replace decals open vent gas cap. Run mow 30 min
Did you find this story helpful?
Thank you for voting!

Carburetor had old gas clogging the fuel flow

Kevin from LONGMONT, Colorado

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set, Wrench set
Parts Used:
796611, 797622, 694395, 398188, 398187
Pulled, rebuild and reinstalled the carburetor.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9138812
Manufacturer Part Number: 797622
Brand Model Number Description
Briggs and Stratton 01050-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01050-0 (010500, 01050 0) Parts
Briggs and Stratton 01052-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01052-0 (010520, 01052 0) Parts
Briggs and Stratton 01052-1 Pressure Washer - Briggs & Stratton Pressure Washer Model 01052-1 (010521, 01052 1) Parts
Briggs and Stratton 01053-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01053-0 (010530, 01053 0) Parts
Briggs and Stratton 01133-0 Generator - Briggs & Stratton Generator Model 01133-0 (011330, 01133 0) Parts
Briggs and Stratton 01282-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01282-0 (012820, 01282 0) Parts
Briggs and Stratton 01433-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-0 (014330, 01433 0) Parts
Briggs and Stratton 01433-1 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-1 (014331, 01433 1) Parts
Briggs and Stratton 01433-2 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-2 (014332, 01433 2) Parts
Lawn Boy 0425A Lawn Mower - Lawn Boy Lawn Mower Model 0425A Parts
Lawn Boy 0427 Lawn Mower - Lawn Boy Lawn Mower Model 0427 Parts
Craftsman 0505-0-580741380 Pressure Washer - 0505-0 - 580.741380, 1,500 Psi (Rev 3 5/20/96) Craftsman
Briggs and Stratton 0647-0 Generator - 2,000 Watt Portable Generator
Craftsman 0647-0-580327700 Generator - 0647-0 - 580.327700, 2,000 Watt Craftsman
Cub Cadet 074R Lawn Mower - Cub Cadet Lawn Mower Model 074R/1989 Parts
Craftsman 0764-0-580762250 Pressure Washer - 0764-0 - 580.762250, 2,250 Psi Craftsman
Briggs and Stratton 0795-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 0795-0 (07950, 0795 0) Parts
Craftsman 0795-0-580677220 Pressure Washer - 0795-0 - 580.677220, 2,250 Psi Craftsman
Briggs and Stratton 083412-0101-01 Engine - Engine
Briggs and Stratton 083412-0105-01 Engine - Engine
Briggs and Stratton 083412-0105-02 Engine - Engine
Briggs and Stratton 083412-0105-03 Engine - Engine
Briggs and Stratton 083412-0105-04 Engine - Engine
Briggs and Stratton 083412-0106-01 Engine - Engine
Briggs and Stratton 084132-0120-E1 Engine - Engine
Briggs and Stratton 084132-0120-E2 Engine - Engine
Briggs and Stratton 084132-0120-E8 Engine - Engine
Briggs and Stratton 084133-0196-E1 Engine - Engine
Briggs and Stratton 084133-0196-E2 Engine - Engine
Briggs and Stratton 084133-0196-E8 Engine - Engine
Pin-float Hinge
$ 6.32
On Order
Minimum Quantity of 2 required
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖