Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gear ring
The gear ring & o ring were exactly as described & fit perfectly! The instruction sheet made it easy to install. The delivery was in a reasonable time frame & came packaged so no broken pieces. I'd ask a question prior to ordering as to whether this part would fit my tractor. I was given an answer the next day & as I was told,it fit & works great.
Guest - October 3, 2019
Verified Purchase
★★★★★
★★★★★
Part was as it was described
The part looks as described.
Terry - January 19, 2020
Verified Purchase
★★★★★
★★★★★
easy repair
Every part fit exactly and delivery was quick.
Guest - November 25, 2020
Verified Purchase
★★★★★
★★★★★
Part worked perfectly. Shipping was fast, everything arrived as listed an no issues. Great service.
Part worked perfectly. Shipping was fast, everything arrived as listed an no issues. Great service.
Kent - June 1, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I removed the recoil starter assembly and then the ring gear assembly. I drilled out the rivets that held the worn ring gear and installed the new ring gear with the machine screws and nuts provided with the new ring gear. I then reinstalled the ring gear mounting assembly and the recoil starter assembly. Immediately after installation,
... Read more I tapped the starter key and the engine started. I put away my tools, jumped on the seat and proceeded to mow the lawn. Thanks to the timely arrival of the ring gear assembly, I rode on the seat instead of walking behind the hand mower.
1. Removed engine shroud, shroud screen, hold down bolts .
2. Removed flywheel .
3. Drilled out rivet ends on ring gear. removed old ring gear.
4. Installed new ring gear with supplied bolts.
5. Re-installed flywheel, hold down bolts, screen, engine shroud.
Remove blower housing and attached items.
Pull flywheel
Remove rivets holding ring gear--either drill or grind the heads off and punch out.
Remove all filings collected by magnets
Bolt on new gear with the screws provided.
Install flywheel back on engine and reinstall all covers.
I left the rope starter in tact and installed an aluminum ring gear to the flywheel, cut a 2 inch section out of the flywheel cover and installed a 12 volt starter, I also added a pushbutton switch with a 4 guage lead to the starter and a lead to use a jumper box for power.
Did you find this story helpful?
Thank you for voting!
starter ring gear was broken on 40 year oldlawn tractor
Arthur from KINGWOOD, West Virginia
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I keep an old MTD lawn tractor at our camping place so I don\'t need to take mower when we go camping. The wheel ring was originally plasctic and was broken. The old briggs engine was still good, I never dreamed I would be able to get the part I needed, let alone, one made better than the original one. It took me most of the day
... Read morebut the 40 year old MTD is back to working. Thanks
Read less
Did you find this story helpful?
Thank you for voting!
the plastic ring gear was shot (no teeth) and the pinion gear teeth were rounded off.
1. I removed the flywheel using the puller
2. I used a hand held high speed grinder to cut off the braided end of the pins holding the ring gear. Then I used a 3/16 inch punch to drive the pins out to remove the ring gear.
4. I then inserted the bolts with the new ring gear in place as directed and tightened to specs.
... Read more>5. I then replaced the flywheel and tightened to specks.
6. I then removed the starter and replaced the pinion gear as per instructions.
7. I then reinstalled the blower housing and drained the gas tank finding water in the gas, I mopped out the tank with paper towel.
8. I removed the carburetor and cleaned it, reinstalling it with a gas filter. It runs like a champ.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9076854
Manufacturer Part Number: 696537
Lawn Mower
- Cub Cadet Lawn Mower Model 131-200D100/SERIAL: 126001 - 207400 (131200D100/SERIAL:126001207400, 131 200D100/SERIAL: 126001 207400) Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
