Part Location Diagram of 692668 Briggs and Stratton Gasket-intake
See part A-51 in the diagram
( Grid squares measure 1x1 inch )

Gasket-intake 692668

Manufactured by:
Briggs and Stratton
ERP Number:
ERP9075631
Part Number:
692668
Original Equipment Manufacturer ?
$5.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine manufacturer-sourced replacement gasket which is specially designed for use with Briggs and Stratton and Toro lawn and garden equipment. It provides an air-tight seal for the carburetor, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Over time the material may wear out and begin to crack eventually requiring a replacement, keep in mind this high-quality composite material component is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Cub Cadet
  • Craftsman
  • Lawn Boy
This part works with the following products:
  • Engine
  • Lawn Mower
  • Pressure Washer
Part# 692668 replaces these:
  • 272487
  • 691882
  • 692668

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Mower sat for 2 years. Gaskets leaked, carburetor clogged, engine ran extremely rough.

Robert from Singers Glen, Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
796611, 692668, 690940, 692667
Removed gas tank, air filter and filter housing to expose carburetor. Removed carburetor and disassembled cleaning all parts with carb cleaner. Scraped remainders of old gaskets off carb with chisel, and steel wool until clean. Use compressed air to blow out any remaining dirt. Installed new gaskets for intake and air cleaner and reassemb led with new bowl. Replaced fuel line as well while I was in there and gas tank was off. Screws purchased were to secure gas tank (original ones were lost at some point during the tear down). As far as special instructions, just be sure gaskets are properly aligned before reassembly, and that remnants of old gaskets that were removed are completely cleaned off. Be careful not to over tighten anything, especially the bolts that secure the air filter housing.
Did you find this story helpful?
Thank you for voting!

Blew a head gasket

Joe from Olyphant, Pennsylvania

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
Tripped head off, inspected all parts, cleaned carburetor bowl while I had it off the engine.
I checked to make sure head and cylinder surface wasn\'t warped, de-carboned piston top and head. Re-assembled.
This type of repair is pretty straight forward.
If your new to this, keep nuts and bolts organized, and it goes easy !!
Did you find this story helpful?
Thank you for voting!

Carburetor intake gasket blown

Dominick from Middletown , New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
692668, 691894
Replaced gasket
Did you find this story helpful?
Thank you for voting!

The carb was gummed up and needed cleaned.

David from PITTSBURGH, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set, Wrench set
Parts Used:
792382, 692668, 691291, 692555
Removed the carb
Removed the carb bowl and used carb cleaner on the jets.
Blew compressed air through the jets.
Confirmed the needle valve was functioning properly.
Re-installed the carb
Replaced the governor spring
Primed and started the engine.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9075631
Manufacturer Part Number: 692668
Brand Model Number Description
Briggs and Stratton 01433-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-0 (014330, 01433 0) Parts
Briggs and Stratton 01433-1 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-1 (014331, 01433 1) Parts
Briggs and Stratton 01433-2 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-2 (014332, 01433 2) Parts
Briggs and Stratton 099772-0100-01 Engine - Engine
Briggs and Stratton 099772-0101-01 Engine - Engine
Briggs and Stratton 099772-0102-01 Engine - Engine
Briggs and Stratton 099772-0110-01 Engine - Engine
Briggs and Stratton 099772-0111-01 Engine - Engine
Briggs and Stratton 099772-0111-02 Engine - Engine
Briggs and Stratton 099772-0112-01 Engine - Engine
Briggs and Stratton 099772-0113-99 Engine - Engine
Briggs and Stratton 099772-0114-01 Engine - Engine
Briggs and Stratton 099772-0115-01 Engine - Engine
Briggs and Stratton 099772-0116-01 Engine - Engine
Briggs and Stratton 099772-0118-01 Engine - Engine
Briggs and Stratton 099772-0119-99 Engine - Engine
Briggs and Stratton 099772-0120-99 Engine - Engine
Briggs and Stratton 099772-0601-01 Engine - Engine
Briggs and Stratton 099772-0602-99 Engine - Engine
Briggs and Stratton 099772-0610-01 Engine - Engine
Briggs and Stratton 099772-0611-01 Engine - Engine
Briggs and Stratton 099772-0612-01 Engine - Engine
Briggs and Stratton 099772-0613-99 Engine - Engine
Briggs and Stratton 099772-0614-01 Engine - Engine
Briggs and Stratton 099772-0615-01 Engine - Engine
Briggs and Stratton 099772-0616-99 Engine - Engine
Briggs and Stratton 099772-0618-01 Engine - Engine
Briggs and Stratton 099772-0619-01 Engine - Engine
Briggs and Stratton 099772-0620-99 Engine - Engine
Briggs and Stratton 099772-0622-01 Engine - Engine