This replacement part is designed for use with Briggs and Stratton engines installed on lawn and garden equipment. It is used to filter out dust and debris from contaminating engine and carburetor. This cartridge will get dirty over time requiring replacement. This is a pleated paper filter with a plastic base/frame. Includes one (1) filter cartridge per order. Please note foam filter is sold separately. Replacing air filter is easy and does not require any tools. • First remove the knob • Remove cover and take out old air filter • Clean out the filter base/housing • Place new air filter in the case • Reassemble and test the engine
Removed air cleaner assembly from carburetor
Replaced primer
Cleaned off old gasket
Replaced with new gasket, used a mix of graphite and oil as sealant
Installed new filter and housing
Added gas, no leaks, pumped primer and started engine.
Tripped head off, inspected all parts, cleaned carburetor bowl while I had it off the engine.
I checked to make sure head and cylinder surface wasn\'t warped, de-carboned piston top and head. Re-assembled.
This type of repair is pretty straight forward.
If your new to this, keep nuts and bolts organized, and it goes easy
... Read more!!
Removed the filter cover,remove the foam filter and the filter cartridge and replaces them.
Removed the blade bolt, washer, accelerator blade and the main blade. Installed the new blade, the new accelerator blade, washer, then tightened the blade bolt.
Craftsman (Briggs & Stratton engine) tow-behind tiller had sat for years. Unseized pistons with PB Blaster. Replaced carburetor, oil, gear reduction oil, spark plug, and air filter. Took a few pulls of starter cord, but started right up.
For the mower blade- I disconnected the spark plug to make sure the engine didnt start.
Tilting the mower backwards, accessing the mower blade.
Brace the blade so it does not move. Using a socket wrench loosen the not holding the blade.
Once the blade was off. place the now blade the same way the old blad came off makin
... Read moreg sure the blade is tight.
To replace athe air filter- Unscrew the two top screws holding down the filter cover.
slide the fome filter over the paper filter and place the filter back onto the carborator and screw cover back onto the mower.
Replaced the air filter as I do annually. Simple maintenance! The primer bulb was cracked after 12 years of use and making starting/restarting difficult, and replaced it. Had to remove the bulb housing assembly from carb to make the repair. Piece of cake. Wing knob was worn from the rope rubbing on it, my fault for not noticing. Easy repl
... Read moreacement!
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
