Part Location Diagram of 692232 Briggs and Stratton Engine Crankcase Gasket
See part B12 in the diagram
( Grid squares measure 1x1 inch )

Engine Crankcase Gasket 692232

Manufactured by:
Briggs and Stratton
ERP Number:
ERP9066140
Part Number:
692232
Original Equipment Manufacturer ?
  Works with your model  20808!
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(18 rated repairs) ?
  Works with your model   20808!

Product Description

?

This part is the replacement gasket for the crankcase on your engine. The gasket helps to create a seal on the crankcase and prevent leaks. If you notice that your engine is not running at peak performance, it could be because of a damaged crankcase. A damaged crankcase gasket can cause serious problems in your engine, so it is recommended to replace it immediately if it is damaged. This product is gray in color and is sold individually. It is a genuine OEM part from the manufacturer.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Cub Cadet
  • Lawn Boy
  • Craftsman
  • MTD
  • Simplicity
This part works with the following products:
  • Engine
  • Lawn Mower
  • Pressure Washer
  • Generator
  • Chipper Shredder
Part# 692232 replaces these:
272198, 4182, 692232,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(7 Reviews)
Click to filter by ratings:
  • 5 stars
    7
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(18 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Leaking lower crankshaft seal.

Robert from Ridgway, Pennsylvania

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
692232, 399781S
Drain oil, remove engine from mower, remove lower half of crankcase and pry out the old seal. Clean up the crankshaft, push the new seal into the lower half of the crankcase, then install the new gasket and bolt everything back together.
Did you find this story helpful?
Thank you for voting!

very little compression ex. valve leaked

Hans from ARLINGTON, Texas

3 of 3 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Completely disassembled engine cleaned all parts and repainted
honed the cylinder, regrind both valves
reassembled all parts by changing out all ordered parts.

Did you find this story helpful?
Thank you for voting!

New 21\" front self propelled push mower 190cc B&S engine with less than 5 hours use. mower blade found part of fallen tree limb and it jammed between blade and mower deck. The impact broke the cam\'

Kent from Leroy, Michigan

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Removed blade
Removed engine
Drained oil and fuel.
Removed crankcase cover and cylinder head.
Removed damaged camshaft assembly and oil slinger
Inspected crankshaft valves and lifters for damage (none)
Inspected installed crankshaft oil seal for tears/damage(none)
Used assembly lube on all mo ving parts.
Installed valves valve springs and keepers.
Installed lifters
Installed new cam aligned crankshaft/cam timing marks.
Piston at TDC rotated counter clockwise .250\" to check valve to lifter clearance
Installed sump gasket replaced cover and torqued bolts to spec
Installed new cylinder head gasket and torqued cylinder head bolts to spec
Finished reassembly installed motor on to mower deck put on new blade
Pulled starter rope it started let engine warm up get the oil flowing.
MADE sure there were no gremlins in the yard to kill my mower again and cut the grass.






Did you find this story helpful?
Thank you for voting!

The motor lost compression.

John from Kent, Ohio

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
799875, 797521, 692232
Open the cylinder head and remove the timing gear. Reinstalled in reverse order and swapped the gaskets.
Did you find this story helpful?
Thank you for voting!

Leaking oil

Joseph from North Ridgeville, Ohio

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
593875, 692232, 299819S
Removed the old seal, replaced with the new. Also replaced the muffler guard.
Did you find this story helpful?
Thank you for voting!

The Governor would not engage replaced the oil slinger Governor

James from Lavergne, Tennessee

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
691997, 692232
Removed engine from mower removes case cleans assembly and removed old gasket. Removed broken slinger/governor weight assembly and reinstalled. Installed new gasket and engine case. Installed engine on mower. Filled with oil/gas run engine. test on yard.
Did you find this story helpful?
Thank you for voting!

Power washer engine governor came apart

Belford from BEAUMONT, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
298090S, 793604, 796650, 797301, 692232
1 Remove engine from pressure washer
2 Disassemble crankcase
3 Remove old governor assembly
4 Installed new governor assembly
5 Assemble crankcase with new gasket
6 Install new governor spring at carburetor
7 Replace air filter element
8 Reinstall engine on pressure washer
9 Fill crankcase w ith oil
10 Run about 10 minutes
11 Drain oil and refill ( this removes impurities that may have remained from opening engine)
Did you find this story helpful?
Thank you for voting!

Exhaust valve held open.

Robert from St Peters, Missouri

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
699833, 692232
1. Disassembled the engine.
2. Drove the valve guide back into place.
3. Reassembled the engine with the new gaskets.
Did you find this story helpful?
Thank you for voting!

Pressure washer motor ran hot causing it to jump time!

Richard from Waycross, Georgia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
790345, 699833, 692232
Completely disassembled motor replaced timing gear and reassembled!
Did you find this story helpful?
Thank you for voting!

Seal leaking at out put shaft,letting oil drain out and locked the motor up.

joseph from charles town, West Virginia

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
692232, 399781S
Removed the crank case cover. Replaced the out put shaft seal and case gasket. Flushed the engine out with gunk motor flushing oil. Reset the coil clearance. Started the motor, ran for 1/2 hour, drained the oil and replaced with fresh oil. This repair saved me getting a new power washer that would cost around 400.00 dollars. The hardest p art was finding the m/n of the motor as I do not work on these very often.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9066140
Manufacturer Part Number: 692232
Brand Model Number Description
Briggs and Stratton 01050-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01050-0 (010500, 01050 0) Parts
Briggs and Stratton 01052-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01052-0 (010520, 01052 0) Parts
Briggs and Stratton 01052-1 Pressure Washer - Briggs & Stratton Pressure Washer Model 01052-1 (010521, 01052 1) Parts
Briggs and Stratton 01053-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01053-0 (010530, 01053 0) Parts
Briggs and Stratton 01133-0 Generator - Briggs & Stratton Generator Model 01133-0 (011330, 01133 0) Parts
Briggs and Stratton 01282-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01282-0 (012820, 01282 0) Parts
Briggs and Stratton 01433-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-0 (014330, 01433 0) Parts
Briggs and Stratton 01433-1 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-1 (014331, 01433 1) Parts
Briggs and Stratton 01433-2 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-2 (014332, 01433 2) Parts
Briggs and Stratton 021022-00 Washer - Gas Power Washer
Briggs and Stratton 021027-00 Washer - Gas Power Washer
Craftsman 0505-0-580741380 Pressure Washer - 0505-0 - 580.741380, 1,500 Psi (Rev 3 5/20/96) Craftsman
Briggs and Stratton 0647-0 Generator - 2,000 Watt Portable Generator
Craftsman 0647-0-580327700 Generator - 0647-0 - 580.327700, 2,000 Watt Craftsman
Cub Cadet 074R Lawn Mower - Cub Cadet Lawn Mower Model 074R/1990 Parts
Craftsman 0764-0-580762250 Pressure Washer - 0764-0 - 580.762250, 2,250 Psi Craftsman
Briggs and Stratton 0795-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 0795-0 (07950, 0795 0) Parts
Craftsman 0795-0-580677220 Pressure Washer - 0795-0 - 580.677220, 2,250 Psi Craftsman
Lawn Boy 10244 Lawn Mower - Green Series Lawnmower
Lawn Boy 10245 Lawn Mower - Green Series Lawnmower
Lawn Boy 10316 Lawn Mower - Silver Series Lawnmower
Lawn Boy 10317 Lawn Mower - Silver Series Lawnmower
Lawn Boy 10318 Lawn Mower - Silver Series Lawnmower
Lawn Boy 10319 Lawn Mower - Silver Series Lawnmower
Lawn Boy 10329 Lawn Mower - Silver Series Lawnmower
Lawn Boy 10344 Lawn Mower - Green Series Lawnmower
Lawn Boy 10345 Lawn Mower - Green Series Lawnmower
Lawn Boy 10416 Lawn Mower - Gold Series Lawnmower
Lawn Boy 10418 Lawn Mower - Gold Series Lawnmower
Lawn Boy 10421 Lawn Mower - Gold Series Lawnmower