Part Location Diagram of 690940 Briggs and Stratton Screw
See part A284 in the diagram
( Grid squares measure 1x1 inch )

Screw 690940

Manufactured by:
Briggs and Stratton
ERP Number:
ERP9064505
Part Number:
690940
Original Equipment Manufacturer ?
  Works with your model  10521!
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

Less than 15 mins 

(5 rated repairs) ?
  Works with your model   10521!

Product Description

?

This replacement screw is a high quality hardware that is commonly utilized on Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It has multiple applications depending on the unit, please make sure to check appropriate diagrams of your mode for correct location and use of this screw. Note that this hex head scrwe is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Cub Cadet
  • Lawn Boy
  • Craftsman
  • Simplicity
  • Murray
  • Poulan
  • Kenmore
This part works with the following products:
  • Engine
  • Lawn Mower
  • Pressure Washer
  • Lawn Tractor
  • Generator
  • Chipper Shredder
  • Leaf Blower / Vacuum
Part# 690940 replaces these:
690940, 94511, NA,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Mower sat for 2 years. Gaskets leaked, carburetor clogged, engine ran extremely rough.

Robert from Singers Glen, Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
796611, 692668, 690940, 692667
Removed gas tank, air filter and filter housing to expose carburetor. Removed carburetor and disassembled cleaning all parts with carb cleaner. Scraped remainders of old gaskets off carb with chisel, and steel wool until clean. Use compressed air to blow out any remaining dirt. Installed new gaskets for intake and air cleaner and reassemb led with new bowl. Replaced fuel line as well while I was in there and gas tank was off. Screws purchased were to secure gas tank (original ones were lost at some point during the tear down). As far as special instructions, just be sure gaskets are properly aligned before reassembly, and that remnants of old gaskets that were removed are completely cleaned off. Be careful not to over tighten anything, especially the bolts that secure the air filter housing.
Did you find this story helpful?
Thank you for voting!

Very old mower. Took apart housing and took off starter rope clean around engine. Needed several screws to properly reassemble

Robert from North Andover, Massachusetts

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
796112S, 691108, 690940
Repair/cleaning of external mower parts was easy. And replacing the spark was also.
Did you find this story helpful?
Thank you for voting!

Lost screws over time.

Michael from APO, Armed Forces Europe

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
690940, 690700
1. Just replaced screws where needed.
Did you find this story helpful?
Thank you for voting!

Missing Screws

George from Lancaster, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
690940
1. Remove two Philips head screws holding the upper plastic engine cover in place and place the cover to the side.
2. Align the gasoline tank with the threaded inserts in the upper metal engine cooling baffle.
3. Install three shoulder screws and torque.
4. Replace the upper plastic engine cover and align attach holes. < br />5. install two Phillips head screws.
Did you find this story helpful?
Thank you for voting!

Worn wheels, broken washer, and cracked/broken gear guard, and replaced lost screw that held gas tank in place.

John from Dayton, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Socket set
Parts Used:
74-1660, 690940
Removed the worn and parts installed the new ones.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9064505
Manufacturer Part Number: 690940
Brand Model Number Description
Briggs and Stratton 01050-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01050-0 (010500, 01050 0) Parts
Briggs and Stratton 01052-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01052-0 (010520, 01052 0) Parts
Briggs and Stratton 01052-1 Pressure Washer - Briggs & Stratton Pressure Washer Model 01052-1 (010521, 01052 1) Parts
Briggs and Stratton 01053-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01053-0 (010530, 01053 0) Parts
Briggs and Stratton 01133-0 Generator - Briggs & Stratton Generator Model 01133-0 (011330, 01133 0) Parts
Briggs and Stratton 01282-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01282-0 (012820, 01282 0) Parts
Briggs and Stratton 01433-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-0 (014330, 01433 0) Parts
Briggs and Stratton 01433-1 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-1 (014331, 01433 1) Parts
Briggs and Stratton 01433-2 Pressure Washer - Briggs & Stratton Pressure Washer Model 01433-2 (014332, 01433 2) Parts
Craftsman 0505-0-580741380 Pressure Washer - 0505-0 - 580.741380, 1,500 Psi (Rev 3 5/20/96) Craftsman
Briggs and Stratton 0647-0 Generator - 2,000 Watt Portable Generator
Craftsman 0647-0-580327700 Generator - 0647-0 - 580.327700, 2,000 Watt Craftsman
Cub Cadet 074R Lawn Mower - Cub Cadet Lawn Mower Model 074R/1990 Parts
Craftsman 0764-0-580762250 Pressure Washer - 0764-0 - 580.762250, 2,250 Psi Craftsman
Briggs and Stratton 0795-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 0795-0 (07950, 0795 0) Parts
Craftsman 0795-0-580677220 Pressure Washer - 0795-0 - 580.677220, 2,250 Psi Craftsman
Briggs and Stratton 099772-0100-01 Engine - Engine
Briggs and Stratton 099772-0101-01 Engine - Engine
Briggs and Stratton 099772-0102-01 Engine - Engine
Briggs and Stratton 099772-0110-01 Engine - Engine
Briggs and Stratton 099772-0111-01 Engine - Engine
Briggs and Stratton 099772-0111-02 Engine - Engine
Briggs and Stratton 099772-0112-01 Engine - Engine
Briggs and Stratton 099772-0113-99 Engine - Engine
Briggs and Stratton 099772-0114-01 Engine - Engine
Briggs and Stratton 099772-0115-01 Engine - Engine
Briggs and Stratton 099772-0116-01 Engine - Engine
Briggs and Stratton 099772-0118-01 Engine - Engine
Briggs and Stratton 099772-0119-99 Engine - Engine
Briggs and Stratton 099772-0120-99 Engine - Engine