Part Location Diagram of 299060 Briggs and Stratton Valve-high Speed
See part F-681 in the diagram
( Grid squares measure 1x1 inch )

Valve-high Speed 299060

Manufactured by:
Briggs and Stratton
ERP Number:
ERP8948655
Part Number:
299060
Original Equipment Manufacturer ?
$24.54
Special Order

Easy 

1- 2 hours 

(7 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This needle valve kit is an OEM direct from Briggs & Stratton. The kit is compatible with many lawn and garden engines. This item is composed of high-quality metal and plastic components. Fastened to the engine carburetor, the kit carefully controls the fuel flow to the motor. A screwdriver and a wrench set is often required for the proper repair. The needle valve kit is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Craftsman
  • Cub Cadet
This part works with the following products:
  • Engine
  • Lawn Mower
  • Leaf Blower / Vacuum
  • Tiller
  • Lawn Tractor
Part# 299060 replaces these:
  • 299060
  • 555127

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

1- 2 hours 

(7 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The engine would start with difficulty but wouldn\'t keep running

John from Staunton, Virginia

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
299060, 27355S, 270026
I soaked the carb in cleaner, ringed it off and blew out the ports and installed the new parts. The diaphragm was the main culprit but a new spark plug helped too.
Did you find this story helpful?
Thank you for voting!

Found my grandfather\'s old plow under a pile of scrap metal while clearing out my dad\'s barn. The 5 hp implement was on its side in the dirt and was last used 40 years or more.

Joe from Fort Valley, Georgia

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench set
1. Removed starter rope assembly in order to remove dirt.
2. Removed and flushed fuel tank.
3. Cleaned carb and replaced needle valve and diaphragm and spring.
4. Replace spark plug.
5. Reassembled and started. Runs fine!
Did you find this story helpful?
Thank you for voting!

Engine was running but rough.

Roger from Custer, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
299060, 270026
1. Removed and replaced the needle and the seat with a screwdriver and a socket set.
2. Removed the diaphragm cover, cleaned and replaced the new diaphragm.
3. Adjusted needle to an approximate setting.
4. Started the engine and adjusted the needle.
Did you find this story helpful?
Thank you for voting!

Needle valve was broken. Tip was missing.

Rick from Roseburg, Oregon

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
Parts Used:
299060
Removed the old needle valve and replaced it.
Did you find this story helpful?
Thank you for voting!

Engine running bad.Loading up,going dead ect.

Billy from Duncanville, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
690498, 299060, 27355S, 270026
Disconnected throttle, kill switch and gov. spring. Removed fuel tank and carb. as a unit. Removed carb. from tank. Disassembled carb. Cleaned all ports and opening with carb. cleaner. Used compressed air to blow out all opening. Reassembled carb using new parts. Mounted carb. to fuel tank and attached to engine. Reconnected everything. A fter starting engine, a little adjustment to carb and good to go.
Did you find this story helpful?
Thank you for voting!

carb was clogged and needed rebuilt

Kip from Nine Mile Falls , Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
690266, 692206, 299060, 27355S, 270073, 270026
Pulled carb off motor of chipper
took fuel tank off
cleaned out fuel tank
took carb apart which consisted of 4 screws and the needle and seat and jet
cleaned it out with carb cleaner and blew it out with compressed air
put new gaskets in along with jet and needle and seat along with diaphragm and spring. ... Read more />installed it back on motor and engine started on the fourth pull
Is running better now than it has in years
I would recommend purchasing a new air cleaner at same time, Mine fell apart.
Did you find this story helpful?
Thank you for voting!

Old lawn mower would start and die.

Harry from Benbrook, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
692206, 299060, 270073, 270026
Removed the carburetor, gave it a good cleaning, replaced the adjusting needle and jet and all the gaskets and seals. Now it starts and runs like a champ. by the way, I bought this mower back in 1968. It\'s a riding mower with a 5hp Brigs and Stratton engine. They just don\'t make them like they used to.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8948655
Manufacturer Part Number: 299060
Brand Model Number Description
Toro 03104 Lawn Tractor - Lawn Tractor
Toro 03108 Lawn Mower - Riding Mower
Briggs and Stratton 060102-1015-01 Engine - Engine
Briggs and Stratton 060102-1015-02 Engine - Engine
Briggs and Stratton 060102-1016-01 Engine - Engine
Briggs and Stratton 060102-1111-01 Engine - Engine
Briggs and Stratton 060102-1130-01 Engine - Engine
Briggs and Stratton 060102-1131-01 Engine - Engine
Briggs and Stratton 060102-1132-01 Engine - Engine
Briggs and Stratton 060102-1133-01 Engine - Engine
Briggs and Stratton 060102-1135-01 Engine - Engine
Briggs and Stratton 060102-1136-01 Engine - Engine
Briggs and Stratton 060102-1137-01 Engine - Engine
Briggs and Stratton 060102-1140-01 Engine - Engine
Briggs and Stratton 060102-1141-01 Engine - Engine
Briggs and Stratton 060102-1143-01 Engine - Engine
Briggs and Stratton 060102-1143-02 Engine - Engine
Briggs and Stratton 060102-1143-03 Engine - Engine
Briggs and Stratton 060102-1144-01 Engine - Engine
Briggs and Stratton 060102-1145-01 Engine - Engine
Briggs and Stratton 060102-1145-02 Engine - Engine
Briggs and Stratton 060102-1145-03 Engine - Engine
Briggs and Stratton 060102-1146-01 Engine - Engine
Briggs and Stratton 060102-1147-01 Engine - Engine
Briggs and Stratton 060102-1148-01 Engine - Engine
Briggs and Stratton 060102-1150-01 Engine - Engine
Briggs and Stratton 060102-1150-02 Engine - Engine
Briggs and Stratton 060102-1150-03 Engine - Engine
Briggs and Stratton 060102-1152-01 Engine - Engine
Briggs and Stratton 060102-1153-01 Engine - Engine