Part Location Diagram of 27404 Briggs and Stratton Gasket-fuel Tank
See part A-191 in the diagram
( Grid squares measure 1x1 inch )

Gasket-fuel Tank 27404

Manufactured by:
Briggs and Stratton
ERP Number:
ERP8938324
Part Number:
27404
Original Equipment Manufacturer ?
  Works with your model  80800SERIES!
$8.45
Special Order

A Bit Difficult 

1- 2 hours 

(5 rated repairs) ?
  Works with your model   80800SERIES!

Product Description

?

A genuine item which is supplied by the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is a high-quality gasket that helps to provide an air-tight seal for the fuel tank, please refer to the appropriate diagram of your model for the correct location and application of this item. Over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality component is made of durable composite material and is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Craftsman
  • Lawn Boy
This part works with the following products:
  • Engine
  • Lawn Mower
  • Tiller
  • Trimmer
Part# 27404 replaces these:
27404,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Edger motor tune up, some one locked tighted the points & condenser screws.

Harry from Gresham, Oregon

1 person found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
692205, 296476, 299059, 27987S, 27355S, 27404
1.removed the carb, replaced the fuel foot valve, removed the fast fuel jet, replaced. replaced the carb. intake gasget ,replaced governor spring, replace air cleaner element.
Removed old oil, place new oil in crank case,
Replace points that were locked tighted inplace, had to heat screws to remove, and the condenser screw h ad to be drilled out and retaped. Cleaned flywheel and coil to get a good spark.
replaced plunger and fly wheel key. Timed an set points .020
replaced spark plug and set to .o30. adjusted fast idle jet, edger now runs well and edges nicely. I\'m out of room so have a nice day!
Did you find this story helpful?
Thank you for voting!

Previous owner messed up a repair so I finished it.

Brian from Boise, Idaho

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Parts Used:
27987S, 27355S, 27404
Took off the carb., Air filter and gas tank. Installed new washers and refitted the parts.
Did you find this story helpful?
Thank you for voting!

Gas tank leaked under tank area

Spyros from Southampton, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
27404
Bought and installed the new gasket; evenly tighten the two screws on top.
Did you find this story helpful?
Thank you for voting!

Leaking gaskets

Burt from Cathedral City, California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Parts Used:
691314, 27355S, 27404
Removed Air cleaner, removed gas tank, removed exhaust and removed carburetor. Replaced intake gasket for carburetor, replaced fuel tank gasket, replaced exhaust gasket replaced air filter.
Tightened all bolts, adjusted throttle linkage and fuel valve. Started right up and no additional problems.
Did you find this story helpful?
Thank you for voting!

Engine wouldnGÇÖt start with out pouring gas down carb

Michael from Springfield , Nebraska

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
392854, 296476, 27987S, 27404
1. Pulled carb off. Two Phillips screws and two bolts to engine.
2. Replaced pick up tube.
3. Cleaned fuel tank. Tank had rust filled with evapo rust and let sit over night and turned out alright.
4. Replaced carb gasket to tank. And replaced intake gasket to engine.
5. Installed new air cleaner. It was missing < br />6. Replaced carb jet.
7. Put gas in tank and started and adjusted jet.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8938324
Manufacturer Part Number: 27404
Brand Model Number Description
Briggs and Stratton 060101-0010-99 Engine - Engine
Briggs and Stratton 060101-0110-99 Engine - Engine
Briggs and Stratton 060101-0130-99 Engine - Engine
Briggs and Stratton 060101-0153-99 Engine - Engine
Briggs and Stratton 060101-0165-99 Engine - Engine
Briggs and Stratton 060101-0166-99 Engine - Engine
Briggs and Stratton 060101-0167-99 Engine - Engine
Briggs and Stratton 060101-0168-99 Engine - Engine
Briggs and Stratton 060101-0169-99 Engine - Engine
Briggs and Stratton 060101-0178-99 Engine - Engine
Briggs and Stratton 060101-0187-99 Engine - Engine
Briggs and Stratton 060101-0189-99 Engine - Engine
Briggs and Stratton 060101-0191-99 Engine - Engine
Briggs and Stratton 060101-0198-99 Engine - Engine
Briggs and Stratton 060101-0201-99 Engine - Engine
Briggs and Stratton 060101-0204-99 Engine - Engine
Briggs and Stratton 060101-0206-99 Engine - Engine
Briggs and Stratton 060101-0215-99 Engine - Engine
Briggs and Stratton 060101-0219-99 Engine - Engine
Briggs and Stratton 060101-0220-99 Engine - Engine
Briggs and Stratton 060101-0224-99 Engine - Engine
Briggs and Stratton 060101-0228-99 Engine - Engine
Briggs and Stratton 060101-0233-99 Engine - Engine
Briggs and Stratton 060101-0238-99 Engine - Engine
Briggs and Stratton 060101-0243-99 Engine - Engine
Briggs and Stratton 060101-0261-99 Engine - Engine
Briggs and Stratton 060101-0276-99 Engine - Engine
Briggs and Stratton 060101-0290-99 Engine - Engine
Briggs and Stratton 060101-0338-99 Engine - Engine
Briggs and Stratton 060101-9400-10 Engine - Engine