Part Location Diagram of 271466 Briggs and Stratton Filter-pre Cleaner
See part A-535A in the diagram
( Grid squares measure 1x1 inch )

Filter-pre Cleaner 271466

Manufactured by:
Briggs and Stratton
ERP Number:
ERP8937831
Part Number:
271466
Original Equipment Manufacturer ?
$5.95
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(6 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an OEM approved replacement part designed for gas trimmers/brush cutters. Its purpose is to filter out dust and debris from the air that goes into the unit. Over time it will get dirty and clogged restricting the airflow eventually requiring replacement. Please note this high quality foam air cleaner element is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Simplicity
  • Craftsman
This part works with the following products:
  • Engine
  • Leaf Blower / Vacuum
  • Lawn Mower
  • Trimmer
  • Edger
Part# 271466 replaces these:
270979, 271466, 4109,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Blown head gasket on 5 hp walk behind blower

Tom from Fort Wayne, Indiana

6 of 6 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Parts Used:
796112S, 396424S, 272157S, 271466
Had to figure out the torque spec on a Briggs 5 hp, horizontal shaft engine but did a little internet searching and found it.

Remove the existing motor head carefully to ensure that the bolts were tracked for reassembly and not lost. Scrapped the existing gasket material from the head and the motor housing. Took a little time to wire wheel carbon from the piston and valves. Put the new gasket on the head and reassembled. Torqued it down to what I believe is the proper spec.

Changed the spark plug and air filter.

Started on the second pull.
Did you find this story helpful?
Thank you for voting!

tiller would not stay running

Michael from FORT VALLEY, Virginia

1 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
396424S, 272409S, 271466
Pick up tube fell off bottom of carburetor into the fuel tank. Removed fuel tank, secured the original pick up tube and reinstalled fuel tank. Not as easy as it sounds considering I did not remove carburetor because the mounting bolts were stripped. Tiller is 20years old.
Did you find this story helpful?
Thank you for voting!

filter bad

mike from ELIZABETH, Colorado

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
271466
put new filter in
Did you find this story helpful?
Thank you for voting!

Chipper was left with ethanol fuel and rotted the bottom of the fuel tank out and left the carb full of yellow GÇ£sandGÇ¥. The rewind spring was broken, the engine would not turn over, as it turned ou

Steve from Spanaway, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set, Wrench set
Removed the fuel tank and carb cleaned the carb and installed the rebuild kit. I cut the damaged metal out of the fuel tank, cleaned the rust out of the rest of the tank with a needle scaler and welded a new bottom onto the tank. Next I pulled the blower housing off and replaced the rewind spring. After that I pulled the housing off the c hipper, took the flails apart and freed them up, cleaned the mouse nest out, gave everything a coat of paint.
Now I have a good chipper that starts on the second pull that I saved from going to the dump for very little money.
Did you find this story helpful?
Thank you for voting!

Air filter cartridge dirty, air cleaner element and breather tube grommet missing

Raymond from Clarks Summit, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
692189, 396424S, 271466
Replaced air cleaner cartridge
Installed air cleaner element
Installed breather tube grommet
Did you find this story helpful?
Thank you for voting!

Routine maintenances and broken air cleaner Stud

Mark from Snyder, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Socket set, Wrench set
Parts Used:
691735, 396424S, 271466, 231176
Pulled carb. So as not to get metal shavings in engine, when drilling out broken stud. Use easy out to remove broken air cleaner stud. Replace carb. install new parts. Simple
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8937831
Manufacturer Part Number: 271466
Brand Model Number Description
Briggs and Stratton 060101-0010-99 Engine - Engine
Briggs and Stratton 060101-0110-99 Engine - Engine
Briggs and Stratton 060101-0130-99 Engine - Engine
Briggs and Stratton 060101-0153-99 Engine - Engine
Briggs and Stratton 060101-0165-99 Engine - Engine
Briggs and Stratton 060101-0166-99 Engine - Engine
Briggs and Stratton 060101-0167-99 Engine - Engine
Briggs and Stratton 060101-0168-99 Engine - Engine
Briggs and Stratton 060101-0169-99 Engine - Engine
Briggs and Stratton 060101-0178-99 Engine - Engine
Briggs and Stratton 060101-0187-99 Engine - Engine
Briggs and Stratton 060101-0189-99 Engine - Engine
Briggs and Stratton 060101-0191-99 Engine - Engine
Briggs and Stratton 060101-0198-99 Engine - Engine
Briggs and Stratton 060101-0201-99 Engine - Engine
Briggs and Stratton 060101-0204-99 Engine - Engine
Briggs and Stratton 060101-0206-99 Engine - Engine
Briggs and Stratton 060101-0215-99 Engine - Engine
Briggs and Stratton 060101-0219-99 Engine - Engine
Briggs and Stratton 060101-0220-99 Engine - Engine
Briggs and Stratton 060101-0224-99 Engine - Engine
Briggs and Stratton 060101-0228-99 Engine - Engine
Briggs and Stratton 060101-0233-99 Engine - Engine
Briggs and Stratton 060101-0238-99 Engine - Engine
Briggs and Stratton 060101-0243-99 Engine - Engine
Briggs and Stratton 060101-0261-99 Engine - Engine
Briggs and Stratton 060101-0276-99 Engine - Engine
Briggs and Stratton 060101-0290-99 Engine - Engine
Briggs and Stratton 060101-0338-99 Engine - Engine
Briggs and Stratton 060101-9400-10 Engine - Engine