Part Location Diagram of 262942 Briggs and Stratton Spring-governor
See part K-209 in the diagram
( Grid squares measure 1x1 inch )

Spring-governor 262942

Manufactured by:
Briggs and Stratton
ERP Number:
ERP8936581
Part Number:
262942
Original Equipment Manufacturer ?
  Works with your model  20181!
$12.06
Special Order

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   20181!

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Craftsman
This part works with the following products:
  • Engine
Part# 262942 replaces these:
262762,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Log splitter had been left idle for a couple of years.

Roger from Bellevue, Washington

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
691859, 262942
1. Removed air filter, and fuel tank (2 bolts) from support brackets and from carb (2 screws).
2. Removed carb governor springs.
3. Removed carb from cylinder head (two screws).
4. Cleaned fuel tank (rag and fresh fuel) and old gaskets from tank surface.
5. Put into place two (2) new gaskets, attached new carb, tig htened.
6. Installed carb and screws to cylinder head, tightened.
7. Installed new governor and idle springs. Reinstalled air filter.
8. Added fresh fuel, pumped primer bulb 3 times.
9. Pulled cord 3Xs, started. Checked for leaks, motor oil levels.
10. Started splitting logs.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8936581
Manufacturer Part Number: 262942
Brand Model Number Description
Craftsman 0616-0-71676150 Pressure Washer - 0616-0 - 71.676150, 1,500 Psi (Rev 0 1/30/96) Craftsman
Briggs and Stratton 095902-0107-01 Engine - Engine
Briggs and Stratton 095902-0109-01 Engine - Engine
Briggs and Stratton 095902-0115-01 Engine - Engine
Briggs and Stratton 095902-0115-02 Engine - Engine
Briggs and Stratton 095902-0117-01 Engine - Engine
Briggs and Stratton 095902-0126-01 Engine - Engine
Briggs and Stratton 095902-0129-01 Engine - Engine
Briggs and Stratton 095902-0131-01 Engine - Engine
Briggs and Stratton 095902-3148-01 Engine - Engine
Briggs and Stratton 096902-0101-01 Engine - Engine
Briggs and Stratton 096902-0106-01 Engine - Engine
Briggs and Stratton 096902-0106-02 Engine - Engine
Briggs and Stratton 096902-0106-99 Engine - Engine
Briggs and Stratton 096902-0107-01 Engine - Engine
Briggs and Stratton 096902-0109-01 Engine - Engine
Briggs and Stratton 096902-0112-99 Engine - Engine
Briggs and Stratton 096902-0115-01 Engine - Engine
Briggs and Stratton 096902-0116-01 Engine - Engine
Briggs and Stratton 096902-0119-01 Engine - Engine
Briggs and Stratton 096902-0120-01 Engine - Engine
Briggs and Stratton 096902-0121-99 Engine - Engine
Briggs and Stratton 096902-0122-01 Engine - Engine
Briggs and Stratton 096902-0124-01 Engine - Engine
Briggs and Stratton 096902-0125-01 Engine - Engine
Briggs and Stratton 096902-0125-02 Engine - Engine
Briggs and Stratton 096902-0126-99 Engine - Engine
Briggs and Stratton 096902-0129-01 Engine - Engine
Briggs and Stratton 096902-0130-01 Engine - Engine
Briggs and Stratton 096902-0153-99 Engine - Engine