Part Location Diagram of 597327 Briggs and Stratton Carburetor
See part 125A in the diagram
( Grid squares measure 1x1 inch )

Carburetor 597327

Manufactured by:
Briggs and Stratton
ERP Number:
ERP16382859
Part Number:
597327
Original Equipment Manufacturer ?
  Works with your model  CMXGWAS020734!
$90.87
On Order

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   CMXGWAS020734!

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Craftsman
This part works with the following products:
  • Engine

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Pressure washer would start if you squirted gas into the carb. Then it would quit indicating there was Spark and Compression but not getting fuel thru the carburetor.

Dennis from Warsaw, Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Parts Used:
597327
You will be well off to use two pair of needle nose pliers and a set of nut drivers
1. Removed cowling from the engine.
2. Remove air filter cover and filter.
3. Unplug the ignition switch wire from the air filter housing.
4. Removed hose clamp for fuel line.
5. Carefully unhooked the Governor Rod and the heat riser rod. (DonGÇÖt bend them)
6. With a nut driver set remove the 4 bolts holding the Air filter housing. (These bolts also are the carburetor bolts)
7. Pay attention to the springs on the carburetor as you will have to put them back on the new carburetor. ( take a picture for reference)
8. Gently pull the carburetor straight away from the engine.
9. Simply reverse the process when putting on the new Carburetor.
10. Put a small amount of gas in the tank and inspect for leaks. Start the engine.

Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP16382859
Manufacturer Part Number: 597327
Brand Model Number Description
Briggs and Stratton 021022-00 Washer - Gas Power Washer
Briggs and Stratton 021027-00 Washer - Gas Power Washer
Briggs and Stratton 124P02-0005-F1 Engine - Engine
Briggs and Stratton 124P02-0007-F1 Engine - Engine
Briggs and Stratton 124P02-0009-F1 Engine - Engine
Briggs and Stratton 125P02-0085-F1 Engine - 125p02-0085-F1
Briggs and Stratton 125P02-0086-F1 Engine - 125p02-0086-F1
Briggs and Stratton 125P02-0087-F1 Engine - 125p02-0087-F1
Craftsman CMXGWAS020734 Pressure Washer - Gas Pressure Washer
Craftsman CMXGWAS021022 Pressure Washer - Gas Pressure Washer