All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(1 rated repair)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Pressure washer would start if you squirted gas into the carb. Then it would quit indicating there was Spark and Compression but not getting fuel thru the carburetor.
You will be well off to use two pair of needle nose pliers and a set of nut drivers
1. Removed cowling from the engine.
2. Remove air filter cover and filter.
3. Unplug the ignition switch wire from the air filter housing.
4. Removed hose clamp for fuel line.
5. Carefully unhooked the Governor Rod and the
... Read moreheat riser rod. (DonGÇÖt bend them)
6. With a nut driver set remove the 4 bolts holding the Air filter housing. (These bolts also are the carburetor bolts)
7. Pay attention to the springs on the carburetor as you will have to put them back on the new carburetor. ( take a picture for reference)
8. Gently pull the carburetor straight away from the engine.
9. Simply reverse the process when putting on the new Carburetor.
10. Put a small amount of gas in the tank and inspect for leaks. Start the engine.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16382859
Manufacturer Part Number: 597327
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
