_WW_1.gif "Part Location Diagram of 45-88-7150 Milwaukee Thrust Washer")
Jump to:
This replacement thrust washer is an authentic manufacturer sourced item that is commonly used on Milwaukee power tools. The purpose of a washer is to re-distribute the pressure evenly providing a tight seal for the connecting parts. It is a standard hardware which has multiple uses depending on the equipment, please make sure to check appropriate diagrams for correct locations and use of this thrust washer. Note that one metal washer is included per order.
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Bearing worn on drive wheel. Case was broke
Zane from Holyoke , Colorado
| Brand | Model Number | Description |
|---|---|---|
| Milwaukee | 0729-20 | Band Saw - Bandsaw |
| Milwaukee | 0729-21 | Band Saw - Cordless Band Saw |
| Milwaukee | 1675-1 | Electric Drill - Two Speed Hole Hawg Drill |
| Milwaukee | 1675-6 | Electric Drill - Milwaukee 1675-6 Parts |
| Milwaukee | 1678-20 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 1679-01 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 1679-1 | Electric Drill - Milwaukee 1679-1-(915a) Parts |
| Milwaukee | 1754-1 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 1854-1 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 1854-3 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 2404-1 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 5330 | Demolition Hammer - Rotary Hammer |
| Milwaukee | 5332 | Demolition Hammer - Rotary Hammer |
| Milwaukee | 6223 | Band Saw - Two-Speed AC/DC Band Saw |
| Milwaukee | 6225 | Band Saw - Bandsaw |
| Milwaukee | 6227 | Band Saw - Speed Control Bandsaw |
| Milwaukee | 6230 | Band Saw - 4-3/4 Inch Deep Cut Band Saw |
| Milwaukee | 6230N | Band Saw - Band Saw |
| Milwaukee | 6232-4 | Band Saw - 4-3/4 Inch Deep Cut Bandsaw |
| Milwaukee | 6232-55 | Band Saw - 120mm Deep Cut Band Saw |
| Milwaukee | 6232-6n | Band Saw - Band Saw |
| Milwaukee | 6234 | Band Saw - TSC Bandsaw |
| Milwaukee | 6236 | Band Saw - Two Speed Deep Cut Bandsaw |
| Milwaukee | 6236N | Band Saw - Band Saw |
| Milwaukee | 6238N | Band Saw - Band Saw |
| Milwaukee | 6580-20 | Electric Drill - Adjustable Clutch Screwdriver, 0-1200 RPM |
| Milwaukee | 6580-50 | Electric Drill - Screwdriver |
| Milwaukee | 6581-20 | Electric Drill - Adjustable Torque Screwdriver |
| Milwaukee | 6581-50 | Electric Drill - Electric Drill |
| Milwaukee | 6583-1 | Electric Drill - Adjustable Torque Screwdriver |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 45-88-7150 Milwaukee Thrust Washer")
