Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
10133555-1-M-Milwaukee-45-88-7110-Wavy Spring Washer
Part Location Diagram of 45-88-7110 Milwaukee Wavy Spring Washer
See part 32 in the diagram
( Grid squares measure 1x1 inch )
10133555-1-S-Milwaukee-45-88-7110-Wavy Spring Washer Part Location Diagram of 45-88-7110 Milwaukee Wavy Spring Washer

Wavy Spring Washer 45-88-7110

Manufactured by:
Milwaukee
ERP Number:
ERP10133555
Part Number:
45-88-7110
Original Equipment Manufacturer ?
  Works with your model  5936!
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?
  Works with your model   5936!

Jump to:

Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Electric Drill
  • Band Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bearings wore out.

Bry from NORTH SALT LAKE, Utah

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
45-88-7110, 02-04-0911
1. Disassemble the drill housing.
2. Washed/degreased the gear drive and the motor with a solvent.
3. Used a bearing puller to remove the bearings from the motor axle.
4. Greased the gears.
5. Replaced the motor brushes.
6. Used a hand press to install the new bearings.
7. Assembled the drill hosing.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10133555
Manufacturer Part Number: 45-88-7110
Brand Model Number Description
Milwaukee 1670-1 Electric Drill - Milwaukee 1670-1 Parts
Milwaukee 1675-1 Electric Drill - Two Speed Hole Hawg Drill
Milwaukee 1675-6 Electric Drill - Milwaukee 1675-6 Parts
Milwaukee 1678-20 Electric Drill - Electric Drill / Driver
Milwaukee 1679-01 Electric Drill - Electric Drill / Driver
Milwaukee 1679-1 Electric Drill - Milwaukee 1679-1-(915a) Parts
Milwaukee 4240 Electric Drill - Electric Drill
Milwaukee 4240-2 Electric Drill - Electric Drill
Milwaukee 4245 Electric Drill - Electric Drill
Milwaukee 4245-2 Electric Drill - Electric Drill
Milwaukee 5936 Belt or Drum Sander - 4" Belt Sander with Vacuum Bag
Milwaukee 6225 Saw - Milwaukee 6225 Parts
Milwaukee 6226 Band Saw - Band Saw
Wavy Spring Washer
$ 6.16
In Stock
Minimum Quantity of 2 required
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖