Does this part fit my model?
Need help finding your model number?Jump to:
This is a Genuine OEM Approved replacement part used on Milwaukee Drills. This switch has a Plastic Body. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a Screwdriver. • First make sure the tools is not plugged in • Then you want to remove Screws used to hold two pieces of Housing Set together • Disconnect Wires from the old Switch and remove it from the Housing • Place the new Switch in the Housing and connect Wires to it • Reassembly the Housing
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Switch worked intermittently depending on its orientation to gravity.
Scott from Port Townsend, Washington
intermittent switch operation
Donald from Greensburg, Pennsylvania
triger switch broke
Dawson from WATERFORD, Pennsylvania
On off switch was broke
Ronald from Fort White, Florida
| Brand | Model Number | Description |
|---|---|---|
| Milwaukee | 1001-1 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 1006-1 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 1101-1 | Electric Drill - 1/2" Reversing Drill |
| Milwaukee | 1106-1 | Electric Drill - 1/2" Double Insulated Drill |
| Milwaukee | 1201-1 | Electric Drill - 1/2" Reversing Drill |
| Milwaukee | 1250-1 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 1610-1 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 1630-1 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 1665-1 | Drill Press - Drill Press |
| Milwaukee | 1670-1 | Electric Drill - Single Speed Hole Hawg Drill |
| Milwaukee | 1675-1 | Electric Drill - Two Speed Hole Hawg Drill |
| Milwaukee | 1679-01 | Electric Drill - Electric Drill / Driver |
| Milwaukee | 1679-1 | Electric Drill - Milwaukee 1679-1-(915a) Parts |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 23-66-1020 Milwaukee Switch")
_WW_1.gif "Part Location Diagram of 23-66-1020 Milwaukee Switch")
