This is a genuine manufacturer sourced replacement part is designed for use with Milwaukee power tools. The purpose of this cord is to supply electricity to power the tool, if the cord is damaged it is important to replace it before continuing to use the tool. This durable rubber insulated cord is sold individually, please note cord protector is sold separately.
Troubleshooting
This part works with the following brands:
Milwaukee
This part works with the following products:
Electric Drill
Videos For installing this part.
?
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(2 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Power cord was cut in two parts by a falling metal duct.
1. Removed the red plastic housing\'s three phillips head screws
2. Removed and kept the black cord protector that \"locks\" the cord into the red housing
3. Loosened the torx t-0 screw that clamped down the black wire of the cord into the nibbler trigger mechanism
4. Removed the black wire
5. Loosened the phil
... Read morelips head screw that secured the white wire
6. Removed the white wire
7. Installed the new cord.
The new cord was a perfect match
Read less
Did you find this story helpful?
Thank you for voting!
Dogs chewed up the drill cord. Lucky for them that it wasn\'t plugged in.
Removed three torx head screws from rear motor housing/ drill handle housing to access wire connections
Unplugged the old white wire
Loosened phillips head set screw to release the old black wire
Pulled the old cord through the rubber retainer, reserving the retainer for reuse
Pulled the new cord through the rubbe
... Read morer retainer
Plugged the new white wire in, after feeding it through retainer channel in the drill body
Plugged in the new black wire then secured it by tightening set screw
Inserted rubber cord retainer into opening in base of handle housing
Screwed the housing back onto the drill body
Done
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10122868
Manufacturer Part Number: 22-64-6510
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 22-64-6510 Milwaukee Cordset 10ft 18-2 Sj 120v")
_WW_1.gif "Part Location Diagram of 22-64-6510 Milwaukee Cordset 10ft 18-2 Sj 120v")
