Part Location Diagram of 14-72-0110 Milwaukee Reversing Drive Assembly
See part B-7 in the diagram
Replacing your Milwaukee Electric Drill Reversing Drive Assembly
( Grid squares measure 1x1 inch )

Reversing Drive Assembly 14-72-0110

Manufactured by:
Milwaukee
ERP Number:
ERP10121203
Part Number:
14-72-0110
Original Equipment Manufacturer ?
On Order

Easy 

Less than 15 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

It is a genuine manufacturer-supplied part which is designed for use with Milwaukee drills. This special reversing drive assembly allows a user to operate the tool at an angle. It is an identical replacement for a damaged or a missing component that was included with a new unit. To ensure the correct application, please refer to the owner's manual for your model. One durable metal reversing drive assembly is included. You will need a Hex key to remove and reattach the chuck to replace this assembly.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Electric Drill
  • Cordless Drill

Videos For installing this part.

?
Replacing your Reversing Drive Assembly

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Right angle drive gears were stripped

bob from mesa, Arizona

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
14-72-0110
Installed new right angle drive. Tighten 2 bolts only
Did you find this story helpful?
Thank you for voting!

Broken quill on reversing drive assembly.

Robert from Owensboro, Kentucky

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
1. Removed broken reversing drive assembly.
2. Installed new reversing drive assembly on drill.
3. Threaded new 1/2\" Jacobs chuck on to the out-put quill of the reversing drive assembly.
4. Installed socket head cap screw, into the quill, to lock the chuck into place. Note: The socket head cap screw has reverse th reads!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10121203
Manufacturer Part Number: 14-72-0110
Brand Model Number Description
Milwaukee 0234-1 Electric Drill - Electric Drill / Driver
Milwaukee 0721-20 Cordless Drill - Cordless V28 D-Handle Right-Angle Drill
Milwaukee 0721-21 Cordless Drill - Cordless D-Handle Rad
Milwaukee 48-06-2860 Cordless Drill - Milwaukee 48-06-2860-(54-36-0601) Parts
Milwaukee 48-06-2871 Electric Drill - Right Angle Drive Unit