Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
19507731-1-M-Bosch Tool-1900452012-END SPLICE
Part Location Diagram of 1900452012 Bosch Tool END SPLICE
See part 5/1 in the diagram
( Grid squares measure 1x1 inch )
19507731-1-S-Bosch Tool-1900452012-END SPLICE Part Location Diagram of 1900452012 Bosch Tool END SPLICE

END SPLICE 1900452012

Manufactured by:
Bosch Tool
ERP Number:
ERP19507731
Part Number:
1900452012
Original Equipment Manufacturer ?
  Works with your model  ELECTRONIC!
$6.16
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(2 rated repairs) ?
  Works with your model   ELECTRONIC!

Jump to:

Troubleshooting Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:
  • Bosch
  • Skil
This part works with the following products:
  • Electric Drill
  • Hammer Drill
  • Jig Saw
  • Demolition Hammer
  • Hammer
  • Screwdriver
  • Drill
  • Angle Grinder
  • Grinder
  • Planer Jointer
  • Laminate Trimmer
  • Nibbler & Shears
Part# 1900452012 replaces these:
1900452012,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Sander stopped working and Hook & Loop pad was worn out.

stephen from Silver Spring, Maryland

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
2610917411, 2607200260, 1900452012, 1600A00JE7
Unplug machine, look inside to assess problem. Mine showed melting of the trigger switch/power wire connection. Note location of all wires before disassembling. remove four wires and inspect...the melted one may need to be cleaned up. While machine is open, it\'s a good time to blow out all dust/clean with compressed air. Insert splices o n two incoming power wires and reattach all four wires in original locations. Reassemble in reverse order.

Remove old pad by taking out one bolt. remove old friction ring (note orientation and just pull it off ) install new ring and sanding pad in reverse order.

Test your repair and have fun ! I have a sander that\'s good as new.
Read less
Did you find this story helpful?
Thank you for voting!

Power cord was damaged. Replaced cord and terminal ends

Anthony from Dansville, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
1900452012
1. Removed screws to split case.
2. Carefully removed damaged cord and strain relief observing routing inside tool. Loosened screws holding terminal ends.
3. Used old cord as a template for stripping new cord wires.
4. Crimped new terminal ends onto new cord after stripping wires to proper length using pliers.
5. Replaced strain relief. Routed new cord the same as old cord and tightened screws holding terminal ends.
6. Reassembled case being sure that strain relief is engaged in case properly.
7. Tested grinder.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19507731
Manufacturer Part Number: 1900452012
Brand Model Number Description
Bosch 0601122762 Electric Drill - Drill
Bosch 0601176045 Hammer Drill - Percussion Drill
Bosch 0601178034 Electric Drill - Percussion Drill
Bosch 0601178734 Electric Drill - Percussion Drill
Bosch 0601194739 Hammer - 1/2 Inch Hammer Drill
Bosch 0601404760 Screwdriver - Screwdriver
Bosch 0601405745 Screwdriver - Dummy
Bosch 0601412734 Screwdriver - Drill Screwdriver
Bosch 0601413734 Screwdriver - Drill Screwdriver
Bosch 0601579045 Jig Saw - Jig Saw
Bosch 0601580032 Jig Saw - Jig Saw
Bosch 0601580048 Jig Saw - Dummy
Bosch 0601580703 Jig Saw - Jig Saw
Bosch 0601580732 Jig Saw - Jig Saw
Bosch 0601584134 Jig Saw - Jig Saw
Bosch 0601584834 Jig Saw - Jig Saw
Bosch 0602301201 Grinder - Angle Grinder
Bosch 0602301204 Grinder - Angle Grinder
Bosch 0602301207 Grinder - Angle Grinder
Bosch 0602301211 Grinder - Hf-Angle Grinder
Bosch 0602325001 Grinder - Hf-Angle Grinder
Bosch 0602325004 Grinder - Hf-Angle Grinder
Bosch 0602325007 Grinder - Hf-Angle Grinder
Bosch 0602326104 Grinder - Angle Grinder
Bosch 0611214839 Hammer Drill - Rotary Hammer
Bosch 0612313040 Demolition Hammer - Hf-Demolition Hammer
Bosch 1000VSR Electric Drill - 3/8" Electric Drill
Bosch 1001VSR Electric Drill - 3/8" Electric Drill
Bosch 1002VSR Electric Drill - 3/8" Electric Drill
Bosch 1003VSR Electric Drill - 3/8" Electric Drill
END SPLICE
$ 6.16
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖