Removed screws on handle (3) . Removed old switch and installed new one, paying attention to the location of the four (4) wires and their proper location, install on the new switch. Reinstall switch in housing and handle. Tighten screws. Done.
Easy fix. Part was exactly as described and works perfectly. Thanks for sendi
... Read moreng me the part needed to fix this drill. I have used this drill for many years and am happy to have it fully functional again. Wish I had ordered the part earlier!
Remove the rear handles
Draw up a wiring diagram
Remove the wires from both of the old the switches
Plug the F/R switch into the main switch
Connect the wires to the switch
Tuck the wires out of the way
Attach the rear handles
Remove the switch handles
Made a wiring diagram
Disconnected the wires from the switches
Connected the wires and the change over switch to the main switch
Replaced the switch handles
Changed out the switch button in the hammer / drill selector
Replaced forward / Reverse switch. Simple and easy remove 3 screws in handle and 2 holding the cord in. Pull old switch out and replaced. Took a total of 15 min.
1. Checked receptacle for 110v. 2. Checked cord on drill for 110v. Checked on & off switch. 3. Found change-over switch would not work. Removed the back cover of the drill and the cord clamp. Removed the old change over switch, then replaced it with the new one. Reassembled in reverse order. Works fine now.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19504874
Manufacturer Part Number: 1617200062
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
