This genuine manufacturer-sourced part is specially made for use with Weed Eater trimmers. It is an identical replacement for a missing or a faulty output shaft that was installed on a new unit. This is the part that the blade attaches to. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually.
After ascertaining the output shaft threads were reversed I removed output nut. The removed output shaft retains screws. Next, after removing output shaft in its housing, I removed spring \"C\" clip from the output shaft. Removed the output shaft from the bearing and the housing. Placed the new shaft into the bearing housing, replaced the
... Read more \"C\" clip onto the shaft. Placed the shaft in its housing back onto the edger and fastened all 6 screws. Next, placed the new edger blade onto the output shaft with a washer tightening the new nut onto reverse threads. Job complete.
Read less
Did you find this story helpful?
Thank you for voting!
Blade was spinning on the shaft. D shaped locating shoulder on the drive shaft was rounded off.
Because the belleville lock washer had been left off when the blade was changed, the lock nut became loose, allowing the blade to spin on the drive shaft, rounding off the D-shaped shoulder that locked the blade In position. The fix was to replace the shaft. I also bought a new belleville lock washer and lock nut. After I had the shaft
... Read moreout, I wished I had also bought a new shaft support bearing, since it would have been easy to replace it with the unit already apart. To remove the shaft, start by removing the left hand thread lock nut that holds the blade on the shaft. Remove the dished belleville lock washer and blade. Removed the gearbox cover behind the blade. The drive shaft and bearing come off with the cover. Remove the snap ring or circlip that holds the shaft in the bearing. Insert the new shaft into the bearing and replace the snap ring. Insert the shaft back into the gearbox and reinstall the gearbox cover. Slip the new blade over the shaft followed by the belleville dished washer and the left hand thread lock nut. A small cordless impact driver makes removal and installation of the nut very easy, but it can be done with hand tools.
Read less
Did you find this story helpful?
Thank you for voting!
Threads on blade shaft and in nut worn out, would not tighten up
Removed cover plate and removed snap ring to remove shaft. replace shaft as it just slides right out. Be sure before replacing cover plate grease the output gears that drive the output shaft as they are under the cover plate.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16352907
Manufacturer Part Number: 530095070
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/parts/lawn-and-garden/edger/wheels-and-rollers/"},{"position":2,"name":"530095070","title":"530095070","url":""}]
