Part Location Diagram of A101191 Powermate Fuel Line Fitting / Filter
See part Q-4 in the diagram
( Grid squares measure 1x1 inch )

Fuel Line Fitting / Filter A101191

Manufactured by:
Powermate
ERP Number:
ERP10040226
Part Number:
A101191
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine replacement part that has been sourced from the original manufacturer to be used with blowers and edgers from Powermate and Southland. The plastic fuel fitting is used to couple portions of the fuel line between the tank and the carburetor. This fitting is also used as a filter to prevent contaminants from entering the fuel intake. This fuel line fitting is sold as an individual replacement part.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Powermate
  • Southland
This part works with the following products:
  • Edger
  • Leaf Blower / Vacuum
  • Tiller

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Fuel filter needed replaced

John from Youngstown, Ohio

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Socket set
Parts Used:
A101191
1.) Removed the fuel hose from the carburetor with pliers and drained the gas from the tank.
2.) removed the 3 bolts holding the gas tank on the edger with 10mm deep socket.
3.) Removed the fuel line from the gas tank with pliers.
4.) Removed the fuel filter with a 12mm deep socket.
5.) Installed the new fuel filt er and reattached the fuel line to the tank.
6.) Reinstalled the gas tank.
7.) Reattached the fuel line to the carburetor and refilled the gas tank.
Did you find this story helpful?
Thank you for voting!

Not starting

Ken from Howell, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
A101191
1. Removed gas
2.took plastic guard off (2 screws)
3.removed hose with pliers
4.took off 3 bolts holding gas tank
5.removed old gas filter
6.installed new gas filter
7.put it all back together by reversing process
Did you find this story helpful?
Thank you for voting!

Carburetor broke and fuel filter broke and aire filter dirty.

Rene from Appleton, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
A101191, A100631
To replace fuel line take gas tank off.
Did you find this story helpful?
Thank you for voting!

Maintenance on edger

jose from WALESKA, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
A100503, A101191, A100631
Removed the old parts. Installed the new parts.
Did you find this story helpful?
Thank you for voting!
  • 1