Part Location Diagram of 132 Little Wonder Tension Pin, 1/4
See part B-8 in the diagram
( Grid squares measure 1x1 inch )

Tension Pin, 1/4 132

Manufactured by:
Little Wonder
ERP Number:
ERP12092083
Part Number:
132
Original Equipment Manufacturer ?
  Works with your model  6236!
$6.16
Special Order
Minimum Quantity of 2 required

Easy 

Less than 15 mins 

(1 rated repair) ?
  Works with your model   6236!

Troubleshooting

This part works with the following brands:
  • Little Wonder
This part works with the following products:
  • Edger

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

30+ yo Model 5001 Little Wonder Edger. Excessive vibration in the edger cutting head.

CRAIG from MALVERNE, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
132
Existing tension pin was loosening up and starting to work it\'s way out of the cutting head housing. This is a 30 + year old edger with a 2HP B & S (original motor). I assume this happened due to metal fatigue and vibration. I just tapped in the new tension pin until it was flush with the cutting head housing and the old one fell ont o the floor. I also plan to inject some grease into the cutter head. I recently had the drive belt replaced and, it\'s still in good shape, so I am hoping that that the grease and new tension pin relieve some vibration of the edger head. I hope this helps some fellow DIY\'ers, Regards, Craig
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP12092083
Manufacturer Part Number: 132
Brand Model Number Description
Little Wonder 5001 Edger - 5001 Edger Trimmer (1965 Through 1990)
Little Wonder 6001 Edger - 6001 Edger Trimmer (1965 Through 1990)
Little Wonder 6001IC Edger - 6001ic Edger Trimmer (1965 Through 1990)
Little Wonder 6001K Edger - 6001k Edger Trimmer (1965 Through 1990)
Little Wonder 6031IC Edger - 6031ic Pro Model Edgers
Little Wonder 6033-00-01 Edger - 6033-00-01 Briggs Powered Edger (From 02-2016 To Present)
Little Wonder 6232-00-01 Edger - 6232-00-01 Honda Powered Edger (From 07-2013 To Present)
Little Wonder 6232-00-59 Edger - 6232-00-59 Honda Powered Edger
Little Wonder 6236 Lawn Tractor Accessories - 6236 Honda Pro Crack Cleaner
Little Wonder 6236-00-01 Edger - Pro Crack Cleaner