Part Location Diagram of 503219835 Husqvarna Screw
See part B-2 in the diagram
( Grid squares measure 1x1 inch )

Screw 503219835

Manufactured by:
Husqvarna
ERP Number:
ERP8987851
Part Number:
503219835
Original Equipment Manufacturer ?
  Works with your model  525ECS!
$5.96
Special Order

Easy 

Less than 15 mins 

(1 rated repair) ?
  Works with your model   525ECS!

Product Description

?

This is an authentic Husqvarna replacement part. The screw is found in yard equipment such as brush cutters and edgers. This part is made of metal, and is used to hold the handle onto the drive tube assembly. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. No tools are required when replacing this part. Simply unscrew the wing nut and remove the old part, then slide the new one into place. This part is sold individually.

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
This part works with the following products:
  • Edger
  • Trimmer
  • Brush Cutter
Part# 503219835 replaces these:
503219835,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The handle was broken

Adriane from McComb, Mississippi

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Removed old handle, installed new.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8987851
Manufacturer Part Number: 503219835
Brand Model Number Description
Husqvarna 123C Trimmer - Husqvarna String Trimmer Model 123C/2004-01 (123C/200401, 123C/2004 01) Parts
Husqvarna 123L Trimmer - String Trimmer
Husqvarna 136LIC Trimmer - Trimmer
Husqvarna 223L Hedge Trimmer - 18 In. Straight Gas Trimmer
Husqvarna 315IC Edger - 315ic
Husqvarna 322C Brush Cutter - 322 C (2000-10)
Husqvarna 322E Edger - Husqvarna Edger Model 322E/1999-10 (322E/199910, 322E/1999 10) Parts
Husqvarna 322L Trimmer - 322 L
Husqvarna 323C Trimmer - Husqvarna String Trimmer Model 323C/2002-01 (323C/200201, 323C/2002 01) Parts
Husqvarna 323E Edger - Husqvarna Edger Model 323E Parts
Husqvarna 323EX Trimmer - Trimmer
Husqvarna 323L Trimmer - Trimmer
Husqvarna 323LD Edger - 323 Ld (20051800001-20051800000)
Husqvarna 323R Brush Cutter - 323 R (20020100001-20041000000)
Husqvarna 323RJ Brush Cutter - Brushcutter
Husqvarna 325 Edger - Edger
Husqvarna 325C Trimmer - 325 C/Cx (2002-01)
Husqvarna 325CX Trimmer - Line Trimmer
Husqvarna 325E Trimmer - X-Series
Husqvarna 325EX Edger - Husqvarna Edger Model 325EX/1999-10 (325EX/199910, 325EX/1999 10) Parts
Husqvarna 325L Edger - 325 L (20020100001-20190500000)
Husqvarna 325LDX Edger - 325 Ldx (20020100001-20051800000)
Husqvarna 325LX Trimmer - 325 Lx, 20020100001-20051800000
Husqvarna 325LXT Trimmer - 325 Lxt, 2002-01
Husqvarna 325RDX Brush Cutter - 325 Rdx (20020100001-20051800000)
Husqvarna 325RJX Brush Cutter - Brushcutter
Husqvarna 325RX Brush Cutter - 325 Rx, 20051800001-20080900000
Husqvarna 325RXT Brush Cutter - 325 Rxt, 2002-01
Husqvarna 326 Edger - Edger
Husqvarna 326C Trimmer - 326 C, 20020500001-20023100000