Part Location Diagram of 534135700 Husqvarna LOCK STRAP
See part A-63 in the diagram
( Grid squares measure 1x1 inch )

LOCK STRAP 534135700

Manufactured by:
Husqvarna
ERP Number:
ERP18524424
Part Number:
534135700
Original Equipment Manufacturer ?
  Works with your model  257796432!
$4.28
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(2 rated repairs) ?
  Works with your model   257796432!

Troubleshooting

This part works with the following brands:
  • Craftsman
  • Poulan
This part works with the following products:
  • Edger
Part# 534135700 replaces these:
534135700,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Edger blade was worn out

Raymond from RidleyPark, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
534205300, 534135700
1. Flattened the retaining tabs on the old strap to allow for the removal of the nuts that
hold the blade on.
2. Removed the two nuts with socket wrench.
3. Removed old strap and blade and cleaned the whole blade area, removing all the dried
grass and dirt.
4. Put new blade and strap on and se cured with the two nuts.
5. Bent up the three retaining tabs on each end of the strap so they touch the nuts.
The strap and its retaining tabs are used to keep the nuts from loosening up during
edger operation.
Did you find this story helpful?
Thank you for voting!

Blade worn out

David from Pacific Grove, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
534135700, 534136600, STD541425
Removed the two old nuts and old washer from the strap
Removed the old strap
Removed the old blade
Installed the new blade, strap, washers and tightened the new nuts
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18524424
Manufacturer Part Number: 534135700
Brand Model Number Description
Craftsman 257796410 Edger - Edger
Craftsman 257796420 Edger - Edger
Craftsman 257796421 Edger - Edger
Craftsman 257796422 Edger - Edger
Craftsman 257796430 Edger - Edger
Craftsman 257796431 Edger - Edger
Craftsman 257796432 Edger - Edger
Craftsman 257796433 Edger - Edger
Craftsman 257857240 Edger - Edger
Craftsman 25785786 Edger - Edger
Craftsman 257857920 Edger - Edger
Craftsman 257857930 Edger - Edger
Craftsman 257857950 Edger - Edger
Craftsman 257857951 Edger - Edger
Craftsman 257857952 Edger - Edger
Craftsman 358796440 Edger - Edger
Craftsman 358796441 Edger - Edger
Craftsman 358796460 Edger - Electric Edger
Poulan 9080E Edger - Electric Edger