Part Location Diagram of P021054380 Echo FAN COVER KIT, GT/PE-225
See part G-4 in the diagram

FAN COVER KIT, GT/PE-225 P021054380

Manufactured by:
Echo
ERP Number:
ERP18543261
Part Number:
P021054380
Original Equipment Manufacturer ?
  Works with your model  GT-225!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(6 rated repairs) ?
  Works with your model   GT-225!

Troubleshooting

This part works with the following brands:
  • Echo
Part# P021054380 replaces these:
P021053070,
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
  • 5 stars
    4
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bearing went out in housing

Bill from Keystone , Iowa

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
P021054380
Remove the upper shaft from the fan cover assembly. Remove the screws from the fan cover assembly, and replace it. Install the upper shaft back in the unit.
Did you find this story helpful?
Thank you for voting!

Edger motor ran but blade did not rotate.

Ron from Dallas, Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
P021054380, A056000240
1. Removed fan cover assembly.
2. Removed clutch assembly.
3. Removed flywheel.
4. Purchased new fan cover assembly, and flywheel. Also replaced clutch which may have not been necessary.
5. Reversed process to reassemble.
Very straight forward process. No surprises. Runs perfectly now.
Did you find this story helpful?
Thank you for voting!

clutch worn out, and bearing on the housing

David from WESTON, Idaho

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
P021054380, A056000230
removed clutch cover and clutch. installed new clutch and new housing covering the clutch. spark plug needs to be removed and rope fed into the piston to stop the engine rotation so clutch can be loosened.
Did you find this story helpful?
Thank you for voting!

Trimmer head would not rotate but engine ran fine

Tucker from Kimberly , Idaho

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
P021054380
Removed curved shaft.
Removed old fan cover assembly.
Installed new tan cover assembly
Put curved shaft back on

Did you find this story helpful?
Thank you for voting!

Bearing inside cover broke

Mark from Panama City, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
P021054380
Disconnected throttle, gas tank, shaft, then cover. Installed new cover, shaft, tank, and throttle assembly. Started and ran like a new one.
Did you find this story helpful?
Thank you for voting!

Trimmer head would not turn, the flexible drive cable would not spin

Stephen from St Petersburg, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
P021054380
1. Removed the old fan cover asy
2. Attached the new asy
3. Connected all the parts.
This part - fan cover asy - was the issue with my 10-yr old Echo trimmer. It works as if new.
Did you find this story helpful?
Thank you for voting!
  • 1