Lint Filter Housing - No Filter Included W11242876

This genuine dryer lint filter housing assembly securely supports the lint screen and helps maintain proper airflow throughout the dryer for efficient drying performance. Designed to capture lint and debris before they enter the exhaust system, it also includes the spring-loaded mechanism that helps keep the lint screen door securely closed during operation. Replacing a cracked, damaged, or worn housing can help restore proper airflow, improve drying efficiency, and support safe dryer operation. Please note that the lint filter screen is not included with this assembly and must be purchased separately if needed Installation Instructions: Disconnect power to the dryer before beginning the repair. Remove the top or front panel as needed to access the lint filter housing area. Remove the mounting screws securing the existing housing assembly. Disconnect any attached components and carefully remove the old housing. Position the new housing assembly in place and secure it with the original mounting hardware. Reconnect any disconnected components and verify the lint screen fits properly within the housing. Reassemble the dryer panels and restore power. Insert the existing or replacement lint filter and run a test cycle to confirm proper airflow and operation. The assembly measures approximately 12 inches long, 8 inches wide, and 6 inches high.