Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
648768-1-M-Frigidaire-134122532 -DRUM
Part Location Diagram of 134122532 Frigidaire DRUM
See part 21 in the diagram
648768-1-S-Frigidaire-134122532 -DRUM 360 view
( Grid squares measure 1x1 inch )
648768-1-S-Frigidaire-134122532 -DRUM 648768-2-S-Frigidaire-134122532 -DRUM 648768-3-S-Frigidaire-134122532 -DRUM 648768-1-S-Frigidaire-134122532 -DRUM 360 view
Part Location Diagram of 134122532 Frigidaire DRUM

DRUM 134122532

Manufactured by:
Frigidaire
ERP Number:
ERP648768
Part Number:
134122532
Original Equipment Manufacturer ?
  Works with your model  FER211AS2!
$385.39
Special Order

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   FER211AS2!

Jump to:

Description Troubleshooting Repair Instructions Model Cross Reference

Product Description

?

This drum is a replacement structural component designed to contain and support materials during operation. It helps ensure proper movement and balance and is commonly replaced when cracked, rusted, or damaged.

Troubleshooting

This part works with the following brands:
  • Frigidaire
  • Westinghouse
  • Gibson
  • Crosley
  • Kenmore
  • Uni
This part works with the following products:
  • Dryer
  • Washer Dryer Combo
Part# 134122532 replaces these:
134122508,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Ink in dryer drum was staining clothes.

ERICH from NORTH OLMSTED, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
134122532
1. Unplug and lift top lid then remove front panel. There should be only 2 screws on the front panel.
2. Remove belt from the motor and tension arm pulley.
3. Lift drum off the rear bearing assembly and remove drum.
4. Remove belt from old drum and put it onto the new drum.
5. Install new drum into dryer lifting th e rear of the drum slightly to set it in the bearing assembly on the rear of the dryer.
6. Install front panel of dryer.
7. Install belt on motor and tension arm pulley.
8. Plug in the dryer and test, belt should realign itself in a few turns of the drum. Close top lid.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP648768
Manufacturer Part Number: 134122532
Brand Model Number Description
Kenmore 41774182301 Dryer
Kenmore 41780412700 Dryer
Kenmore 41784042500 Dryer
Kenmore 41784052500 Dryer
Kenmore 41784152500 Dryer
Kenmore 41787042700 Dryer
Kenmore 41788042700 Dryer
Kenmore 41788052700 Dryer
Kenmore 41788056700 Dryer
Kenmore 41788076700 Dryer
Kenmore 41790412700 Dryer
Kenmore 41790412701 Dryer
Kenmore 41794042500 Dryer
Kenmore 41794052500 Dryer
Kenmore 41794152500 Dryer
Kenmore 41797042700 Dryer
Kenmore 41798042700 Dryer
Kenmore 41798042701 Dryer
Kenmore 41798052700 Dryer
Kenmore 41798052701 Dryer
Kenmore 41798056700 Dryer
Kenmore 41798056701 Dryer
Kenmore 41798076700 Dryer
Kenmore 41798076701 Dryer
Frigidaire BCEQ2152ES1 Dryer - Residential
Frigidaire BEF332CES0 Dryer - Residential
Crosley BEQ1442CES0 Dryer - Residential
Crosley BEQ1442CES1 Dryer - Residential
Crosley CDE2000FW0 Dryer - Residential
Crosley CDE4000FW0 Dryer - Residential
DRUM
$ 385.39
Special Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖