Part Location Diagram of 9550500 Ryobi Spring Washer M5
See part A-28 in the diagram
( Grid squares measure 1x1 inch )

Spring Washer M5 9550500

Manufactured by:
Ryobi
ERP Number:
ERP10085812
Part Number:
9550500
Original Equipment Manufacturer ?
  Works with your model  R-151!
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

Less than 15 mins 

(1 rated repair) ?
  Works with your model   R-151!

Product Description

?

This is a genuine Ryobi replacement part. The spring washer is designed by the manufacturer for use in power tools such as miter saws, routers, and planers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different washers used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver when replacing this item. This part is sold individually.

Troubleshooting

This part works with the following brands:
  • Ryobi
This part works with the following products:
  • Drill
  • Miter Saw
  • Router
  • Reciprocating Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Screw broke off and lost clamp plate

Steve from East China, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
9550500, 6150232, 6130245
remove the screw from opposite side and put clamp plate on and put screw in the job was done.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10085812
Manufacturer Part Number: 9550500
Brand Model Number Description
Ryobi B-424 Belt or Drum Sander - Belt Sander
Ryobi B-7075 Belt or Drum Sander - Belt Sander
Ryobi B-7100 Belt or Drum Sander - Belt Sander
Ryobi BE-424 Belt or Drum Sander - Belt Sander
Ryobi BS-360NR Band Saw - Band Saw
Ryobi BS50N Band Saw - Band Saw
Ryobi C35611 Table Saw - Cutting Saw
Ryobi C356II Miter Saw - Cutting Saw
Ryobi CM-30A Lawn Tractor Accessories - Cm-30a - Everything Else
Ryobi D-130VR Drill - Ryobi Drill Model D-130VR (D130VR, D 130VR) Parts
Ryobi D-130VRR Drill - Ryobi Drill Model D-130VRR (D130VRR, D 130VRR) Parts
Ryobi D-1310R Drill - Ryobi Drill Model D-1310R (D1310R, D 1310R) Parts
Ryobi D-1320 Drill - Ryobi Drill Model D-1320 (D1320, D 1320) Parts
Ryobi D-1320R Drill - Ryobi Drill Model D-1320R (D1320R, D 1320R) Parts
Ryobi D1320RR Drill - Ryobi Drill Model D1320RR Parts
Ryobi DE-1310R Drill - Ryobi Drill Model DE-1310R (DE1310R, DE 1310R) Parts
Ryobi DE-1320 Drill - Ryobi Drill Model DE-1320 (DE1320, DE 1320) Parts
Ryobi DE-1320R Drill - Ryobi Drill Model DE-1320R (DE1320R, DE 1320R) Parts
Ryobi DM-25A Mortiser - Chisel Mortiser
Ryobi E-3900 Screwdriver - Screwdriver
Ryobi E-3910 Screwdriver - Screwdriver
Ryobi E-4000 Screwdriver - Screwdriver
Ryobi ED-211 Hammer Drill - Rotary Hammer Sds
Ryobi ED-382P Hammer Drill - Rotary Hammer Spline
Ryobi EH-1930 Drill - Ryobi Drill Model EH-1930 (EH1930, EH 1930) Parts
Ryobi EJ-100 Reciprocating Saw - Ryobi Reciprocating Saw Model EJ-100 (EJ100, EJ 100) Parts
Ryobi ER-160 Hammer Drill - Gas-Powered Rotary Hammer
Ryobi ER-382K Hammer Drill - Gas-Powered Rotary Hammer
Ryobi G-1255C Grinder - Ryobi Grinder Model G-1255C (G1255C, G 1255C) Parts
Ryobi G-1815C Sander Grinder - Sander/Grinder