Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Took less than 10 mins
Looks like new now
Guest - May 6, 2019
Verified Purchase
★★★★★
★★★★★
Exact factory replacement.
The housing is a genuine Makita part, and worked perfectly. Shipping was quick, and the price was reasonable. I only wish the Serial Number/info label was easier to remove from the old housing, or that the new one came with some replacement adhesive or something.... But that's no fault of ERP's. I'll definitely continue to get replacement parts here.
Gib - January 26, 2021
Verified Purchase
★★★★★
★★★★★
Best place to order tool parts
This place is now my go to place to order parts when I need them. I search and only found one company that had my parts for Makita.
Dominick - August 3, 2021
Verified Purchase
★★★★★
★★★★★
Perfect fit
Perfect fit.my drill looks like new
Guest - March 14, 2023
Verified Purchase
★★★★★
★★★★★
PERFECT PART
THIS WAS DIFFICULT TO CHANGE AS THE REAR BEARING ALIGMENT IS VERY SNUG. BUT THE PART WAS PERFECT AND THE TOOL WORKS GREAT NOW. IT WAS REPAIRED AFTER A HANDFUL OF TWO STORY DROPS ON CONCRETE.
Jason - April 25, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Lay impact on side
2. Remove all screws
3. Use small Flathead to pry open the housing
4. Take a picture of the the inside of the impact (wires, motor, etc.). This helps when reinstalling.
5. Remove all components
6. Install all components into one side of new housing. Reference picture during this step.
... Read morer />7. Place other half of new housing onto the side with components.
8. Tighten both sides of housing with screws from step 2.
9. Test it out to see if everything is working, especially the trigger.
Remover all the screws, separated the left and right side of the old case.
Assembled in the reverse order.
Be sure to note (or take a picture) as to the routing of the internal wires.
Works like new!
1 remove the Phillips head screws
2 remove the top case
3 remove motor switch battery connector
4 put motor switch battery connector into bottom case
5 put top case on
6 replace all Phillips screws
7 test impact
I remove the old broken housing installed the motor and switches into the new one and put it back together. Pretty simple.
On the brushless, you definitely have to make sure the motor housing is in the case otherwise, the motor will not turn
1 first I have to clean the screws
2 take the screw out and take everything apart
3 then put everything in the new housing put the screws back and bingo the impact looks like new thank you
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
