Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
10156026-1-M-Makita-961054-1-Retaining Ring S-14
Part Location Diagram of 961054-1 Makita Retaining Ring S-14
See part 17 in the diagram
( Grid squares measure 1x1 inch )
10156026-1-S-Makita-961054-1-Retaining Ring S-14 Part Location Diagram of 961054-1 Makita Retaining Ring S-14

Retaining Ring S-14 961054-1

Manufactured by:
Makita
ERP Number:
ERP10156026
Part Number:
961054-1
Original Equipment Manufacturer ?
  Works with your model  LS1214F!
$6.16
Special Order

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   LS1214F!

Jump to:

Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:
  • Makita
This part works with the following products:
  • Drill
  • Electric Drill
  • Miter Saw
  • Saw
  • Screwdriver

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

drill chuck not responding to the motor rotation

Ron from Crestone, Colorado

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
961054-1, 254211-1
Tried to remove the chuck from the spindle but the screw would not budge, so I loosened the 4 screws that hold the front housing and pulled it off. the key holding the spindle to the drive gear had sheared so I fished out the broken pieces and inserted a new key, attached the new retaining ring and screwed the front housing back on. The d rill works fine now,
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10156026
Manufacturer Part Number: 961054-1
Brand Model Number Description
Makita 6013BR Electric Drill - Drill
Makita 6013BRK Drill - Drill
Makita 6300LR Electric Drill - Drill
Makita 6301LR Electric Drill - Electric Drill
Makita 6302 Electric Drill - Drill
Makita 6302H Electric Drill - Drill
Makita 6302HK Drill - Drill
Makita 6303 Electric Drill - Drill
Makita 6303H Electric Drill - Drill
Makita BFL300F Electric Drill - Cordless Screwdriver
Makita BFL300FZ Screwdriver - Screwdriver
Makita BFL301RAZ Drill - Drill / Driver
Makita BFL301RZ Drill - Drill / Driver
Makita BFL400F Electric Drill - Cordless Screwdriver
Makita BFL400FZ Screwdriver - Screwdriver
Makita BFL402R Screwdriver - Screwdriver
Makita BFL402RAZ Drill - Drill / Driver
Makita BFL402RZ Screwdriver - Screwdriver
Makita BTS130 Drill - Drill / Driver
Makita DP4700 Electric Drill - 1/2&#34 Electric Drill
Makita DS4011 Cordless Drill - 1/2" Spade Handle Drill
Makita DS4011K Drill - Drill
Makita DS4012 Drill - Drill
Makita HR4510C Hammer Drill - 1-3/4" AVT Anti-Vibration Technology Rotary Hammer
Makita HR4511C Hammer - Rotary Hammer
Makita HR5001C Hammer Drill - Rotary Hammer
Makita LS1013 Miter Saw - Miter Saw
Makita LS1013F Miter Saw - Miter Saw
Makita LS1013FL Miter Saw - Compound Miter Saw
Makita LS1013L Miter Saw - Compound Miter Saw
Retaining Ring S-14
$ 6.16
Special Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖