This is a genuine Makita replacement part, it is sold individually. The purpose of the F/R Change Lever is to change the rotation of the drill motor. It connects to the switch of the tools listed below. By pressing it left or right this will change the rotation of the drill.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Good parts
Received in good condition and fast shipping
Guest - August 26, 2019
Verified Purchase
★★★★★
★★★★★
Change lever
Worked and fit good. Price was right and delivered on time.
Guest - October 12, 2019
Verified Purchase
★★★★★
★★★★★
Excellent
The part was Excellent it was just what I needed.lt was easy to install.It only took about 10 minutes to replace it.
Guest - October 14, 2019
Verified Purchase
★★★★★
★★★★★
Original
After months without using my drill, because a small piece was broken, I was able to get it successfully here, and now after replacing the part I am using my drill again. thanks ereplacementparts
Guest - November 26, 2019
Verified Purchase
★★★★★
★★★★★
Simple repair
A $3 part that was simple to replace made my Wireless Makita drill a functional tool again - like new! Glad I found eReplacement.com!
Guest - February 5, 2020
Verified Purchase
★★★★★
★★★★★
Perfect fit!
Arrived sooner than expected and fit perfectly. Drill is up and reversing again. You don't realize how much you use reverse until it won't reverse.
Guest - April 16, 2020
Verified Purchase
★★★★★
★★★★★
Fast delivery and worked as advertised, saved me $150.00
Perfect
Guest - October 27, 2021
Verified Purchase
★★★★★
★★★★★
Part arrived quickly and was easy
It was just what I needed. YouTube showed me how to install it. Great!
Terry - March 31, 2022
Verified Purchase
★★★★★
★★★★★
Excellent product.
Would purchase again.
Guest - August 12, 2022
Verified Purchase
★★★★★
★★★★★
No reverse fix of drill
My Ryobi drill would not go into reverse, thought I may need a new drill. Soon dissembling it I found the change lever tab broke off. Received my order of new one, installed it with very little trouble and it is working fine.
Guest - September 15, 2022
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove cover,
Make a wiring diagram, remove old switch, install the new switch
Disconnect the old brushes then, connect the new ones
Remove Forward Reverse lever and install new
Install cover
1. Removed all screws from the plastic housings.
2. Removed rear cap and removed all screws.
3. Separated the plastic housings.
4. Removed the rear heat sink.
5. Removed the rear brush holder, armature, and gear box.
6. Cleaned all the parts and greased the gear box.
7. Used Pliers to unplug old brush
... Read more holder from trigger assembly.
8. Plugged new brush holder into trigger assembly.
9. Installed new armature into brush holder and gear box.
10. Reinserted assembly back into the housing and reinstalled heat sink.
11. Installed housing and reinstalled screws.
12. Installed brushes into brush holder.
13. Installed rear cap.
1. Removed all screws on drill and opened drill casing.
2. Pulled out broken lever.
3. Inserted new F/R lever.
4. Put casing back together and tightened all screws.
Removed the screws that hold the 2 half of the case together
Removed the end cap
Removed the broken reversing lever
Replaced the reversing lever
Reassembled the drill
Did you find this story helpful?
Thank you for voting!
Tiger switch didn\'t work, forward and reverse switch h was broken
Removed screws holding drill together and replaced switch
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
