To get at the brushes on a Bosch chipping gun, remove the screws that hold the trigger handle (two are under the switch plate just pop it off with a screwdriver) slid out the brush covers, using a dental tool pull the spring up away from the brush and pull the brush out, replace with new brush, pull off the wire connector and replace with
... Read more new. slide covers back in and put handle cover back on. Pop the switch plate back on, may have to move it back and forth a little to get back in position.
Read less
Did you find this story helpful?
Thank you for voting!
Broken clamping band and missing cheese head screw.
1. Remove ON/Off switch with flat head screwdriver.
2. Remove the six screws holding the handle assembly to the main body.
3. Remove old power cord, keeping in mind its orientation and where the wires connected.
4. Install new cord protector and connect wire ends into their correct locations.
5. Reattach handle ass
... Read moreembly with the six screws.
6. Place On/Off switch half-way in its location and snap the other end in.
7. Verify that the machine functions properly.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19515712
Manufacturer Part Number: 2914551114
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
