10080320-1-M-Ryobi-290013006-Switch Assembly

( Grid squares measure 1x1 inch )

10080320-1-S-Ryobi-290013006-Switch Assembly

Switch Assembly 290013006

Manufactured by:: Ryobi
ERP Number:: ERP10080320
Part Number:: 290013006

Works with your model HP1201M!

$19.02

A Bit Difficult

30 - 60 mins

(1 rated repair) ?

Works with your model HP1201M!

Jump to:

Troubleshooting Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:

Ryobi

This part works with the following products:

Cordless Drill

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult

30 - 60 mins

(1 rated repair) ?

< Prev
1
Next >

Sort by:

Original trigger switch broken.

Ron from Rocky Mount, North Carolina

1 person found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers
Parts Used:: 290013006

Disassembled drill removed switch assembly, pulled 2 wires off switch attached to new switch then attached to motor one wire I had to solder. Carefully reassemble. Viola push trigger it works.

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP10080320
Manufacturer Part Number: 290013006

Brand	Model Number	Description
Ryobi	HP1201	Cordless Drill - 3/8In. Cordless Drill-Driver
Ryobi	HP1201M	Cordless Drill - 12 Volt Cordless Drill/Driver