This is an authentic replacement part that is sourced from the original manufacturer for use with hedge trimmers. The special screw is commonly used to secure the front guard assembly. This screw is sold as an individual replacement part, please note four screws may be required.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect replacement
It was the correct part and worked.
Guest - June 18, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
Good condition
Guest - July 5, 2022
Verified Purchase
★★★★★
★★★★★
easy repair
All parts ordered were received together on time and perfect condition. ereplacementparts.com made it very easy, I highly recommend them, and look forward to future business. Thanks for making it easy and painless !!
Roger - January 30, 2023
Verified Purchase
★★★★★
★★★★★
Easy to work with.
Easy to work with. Parts were exactly as shown. Fit perfectly. Great company.
Guest - January 25, 2025
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
With battery removed, I Removed the screws
Then separated and removed clam shell handle
Careful To disconnect /remove trigger and elects out of handle
Attached 1/2 handle (not the side you put the screws in) to body
Added elects placed other half on handle
Watch wires, don\'t pinch squeeze together check ele
... Read morects and overall fit
Screw together. Enjoy!
removed cover exposing the motor, cleaned in and around motor, removed old brushes and installed new ones, cleaned and greased lower blade drive assembly, reassembled, and test run, proved smoother and quieter operation .
*Remove all the screws from the external casing.
*With a small screw driver pry the old switch off of the two plastic prongs that hold the old switch in place. This is a delicate process for you do not want to break of the plastic prongs.
*Detach the two electrical wires that connect to the old switch
*Reattach these tw
... Read moreo wires to the new switch.
Reinsert the new switch onto the plastic prongs
Re-insert all casing screws.
Task completed.
Replaced clam shell and (1) brush.
Simple remove all screws with a T10 Torx driver.
Reuse switch. Installed brush. ( Attached wire on brush was broken when handle failed.)
Replace with new parts. SIMPLE
Did you find this story helpful?
Thank you for voting!
The blade had become badly worn and chewed up. Could not be sharpened any further
Very simple -
Removed the top handle and blade protector. Removed screws and slipped off.
Removed screws holding the casing, and exposed the blade.
Removed screws holding blade to motor and then removed the blade.
(The blade is one inclusive unit)
Reattach the blade being certain to align with the rotor that
... Read more moves the scissors back and forth. Had to adjust the blades to line up just right.
Reattach housing, I bought new screws for this.
Reattach the blade protector.
Reattach the handle.
Ready to go.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
