This is an authentic manufacturer-sourced replacement part which is specially designed for use with DeWALT drills. It allows a user to secure drill bits. This 1/2" capacity chuck uses a 1/2"-20 spindle for mounting to the drill. The light-weight plastic and single-sleeve design provide user comfort while improving efficiency with easier keyless bit changes. The ratcheting action clicks the jaws tightly into place for reduced bit slippage. Keep in mind this high-quality component is sold individually. Due to a replacement some models may require #50 Part Number N016823. Please make sure to refer to the owners manual for the correct installation. See our post on <a href="http://forums.ereplacementparts.com/power-tool-repair/8-removing-cordless-drill-chuck.html" target=blank_<u>Removing a Cordless Drill Chuck</a> if you need help replacing your old chuck.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great product.
Great product. Could use some instruction,as I wasnt sure which way to turn the fasteners to remove the old chuck. But it worked out and my old drill is good for another 10yrs.
Guest - September 17, 2019
Verified Purchase
★★★★★
★★★★★
Easy find
The product was easy to find at a fair price and arrived quickly
Guest - October 4, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected!
The keyless chuck worked perfectly! Great OEM part!
Fast shipping! Will definitely be my go to store replacement parts!
Guest - October 11, 2019
Verified Purchase
★★★★★
★★★★★
Keyless Chuck replacement
Fit my drill motor perfectly and works great.
Guest - February 24, 2020
Verified Purchase
★★★★★
★★★★★
Part
They had what I needed and customer service was great.
Guest - May 10, 2020
Verified Purchase
★★★★★
★★★★★
easy repair, worked as expected
fit perfectly. Drill working again
Guest - May 11, 2020
Verified Purchase
★★★★★
★★★★★
Arrived late but worth the wait !!
I didn’t receive the drill chuck due to a slow in the mail process, I did receive it , the correct part good quality, My drill is good as new . Great courteous staff to work with, I’ll look for you guys when something else fails, and it always does
Guest - June 9, 2021
Verified Purchase
★★★★★
★★★★★
Prompt service and shipping - Brand new OEM parts, plus DYI videos. Can't ask for more
OEM parts, arrived in perfect condition.
Guest - January 14, 2022
Verified Purchase
★★★★★
★★★★★
restored my Dewalt to former glory
After watching a Youtube video on the procedure to spin off the old chuck, it was a matter of minutes to install the new one. Wala,all is well.
Guest - June 21, 2022
Verified Purchase
★★★★★
★★★★★
Exact part I needed, quick shipping!
This was an easy repair and saved my favorite Dewalt drill/driver.
Guest - February 25, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
My original Dewalt chuck was stuck and warranty was expired. I searched for the original chuck and the reverse screw online until I came up with ereplacementparts.com. What a relief, got my parts fast and fixed my cordless drill. Thanks ereplacementparts.com.
I removed the LH threaded chuck screw with a torx bit. Placed the short end of the largest allen wrench I could fit into the chuck and tightened the chuck. Put the drill in low speed and in the drill mode. Laid the drill on its side and hit the allen wrench with a mallet to remove it from the spindle. Removed the chuck from the spindle ,t
... Read morehen threaded the new chuck on, then screwed the new chuck screw in, to hold the chuck on.
Removed old chuck and replaced. Very simple. Much cheaper than replacing drill
eReplacement has very good service,very expedient,always the right part,and easy to find on their site and fair prices to go along with it.
I used a Torx T-20 screwdriver to remove the LH chuck screw. I then made sure that the drill was in low gear and in the drill setting. Use the largest allen wrench that you can tighten in the chuck. Insert the short end of the allen wrench into the chuck and tighten up the chuck. Lay the drill on its side , then strike the long end of the
... Read more allen wrench with a hammer to unscrew it from the spindle. Once the chuck is removed, screw the new chuck on the drill spindle tight. Then screw in the LH chuck screw. And you\'re done!
reinstall clamshell and endcap. use allen wrench and open end wrench to remove broken chuck.install new chuck and counterclockwise security screw
Did you find this story helpful?
Thank you for voting!
Had to provide a washer (spacer) between the chuck and the drill. Original chuck was constructed with a lip (for lack of a better word) to keep it from binding on the drill housing.
Followed the instructions. I also provided the GÇ£SPACERGÇ¥ (washer) that was required.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
