1. Removed battery
2. Removed all torx screws holding two sides of drill case together
3. Pulled one side of drill off starting at rear
4. Removed old direction slider with broken tabs.
5. Cleaned inside if case while it was open
6. Inserted new slider placing switch lever between two tabs on slider
7.
... Read moreTemporarily put battery in and tested forward and reverse.
8. Removed battery, put other half of case back on.
9. Installed and tightened all screws.
10. Drill now works in both directions - done
I split the tool in half by removing all of the screws that hold it together and gently pulled in apart. I then slipped the old part out, put the new one in and re-assembled the tool. I do most of my own tool repair, but should be no problem for anyone with moderate repair knowledge.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19508287
Manufacturer Part Number: 2601099114
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
