Part Location Diagram of 10NXH Shimano Idle Gear "b"
See part 586 in the diagram
( Grid squares measure 1x1 inch )

Idle Gear "b" 10NXH

Manufactured by:
Shimano
ERP Number:
ERP18254424
Part Number:
10NXH
Original Equipment Manufacturer ?
$6.16
Special Order

Easy 

30 - 60 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

It is a genuine OEM supplied component which is specially designed for Shimano fishing reels. The gear is an important part of the unit which helps to drive the spool. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement to ensure your reel operates properly. One durable idler gear is included. To ensure the correct repair procedure, refer to the appropriate diagrams for your model. You will need a screwdriver to perform this repair.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Shimano
This part works with the following products:
  • Conventional Reels

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Idler gear damaged

Jamie from Brick, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
10NXH
Replaced idler gear. Easy
Did you find this story helpful?
Thank you for voting!

Reel hard to turn

Gary from Poulan, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Reel was hard to turn from bad spool bearings ,right side bearing was stuck on shaft and broke idler gear upon disassembly screws were hard to remove due to long service intervals, cleaned up,lube,installed new part\'s everything ok.
Did you find this story helpful?
Thank you for voting!

Gears were broken

Richard from Winter Garden, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
10NXL, 10NXH, 10L9T
1. Removed the outer cover
2. Removed the broken gears
3. Replaced the broken gears
4. Cleaned and Lubed
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18254424
Manufacturer Part Number: 10NXH
Brand Model Number Description
Shimano TEK-700 Conventional Reels - Tekota Drag Reel
Shimano TEK-800 Conventional Reels - Tekota Drag Reel
Shimano TEK700LC Conventional Reels - Star Drag Reel Tekota
Shimano TEK800LC Conventional Reels - Star Drag Reel Tekota