Part Location Diagram of 1184442 Penn Handle Nut Cap
See part 110A in the diagram

Handle Nut Cap 1184442

Manufactured by:
Penn
ERP Number:
ERP18263767
Part Number:
1184442
Original Equipment Manufacturer ?
  Works with your model  535GS!
$6.16
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   535GS!

Product Description

?

This is an authentic replacement part manufactured for use with Penn conventional reels. The special handle nut cap is used to cover the handle nut to prevent the nut from unthreading which could cause the handle to fall off. This handle nut cap is available as an individual replacement part, please see model diagram for associative parts.

Troubleshooting

This part works with the following brands:
  • Penn
This part works with the following products:
  • Conventional Reels

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Reel needed a complete break down and cleaning. Replaced drag washers, during repair, noticed eccentric spring was not seated probably and bent. Replaced eccentric spring.

Michael from Shrewsbury, Massachusetts

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
1288917, 1190977, 1184442
Completely broke down the reel and cleaned, greased and oiled bearings. Replaced worn, or damaged parts. Also replaced missing parts
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18263767
Manufacturer Part Number: 1184442
Brand Model Number Description
Penn 112H2 Conventional Reels - Special Senator Reel
Penn 113H2 Conventional Reels - Special Senator Reel
Penn 113H2LH Conventional Reels - Special Senator Reel
Penn 113H2LW Conventional Reels - Special Senator Reel
Penn 113H2SP Conventional Reels - Special Senator Reel
Penn 113HN Conventional Reels - Special Senator Reel
Penn 330LD Conventional Reels - Gt Level Wind Reel
Penn 525MAG Conventional Reels - Gs Performance Reels
Penn 535GS Conventional Reels - Gs Performance Reels
Penn 545GS Conventional Reels - Gs Performance Reels
Penn 555GS Conventional Reels - Gs Performance Reels
Penn 955 Conventional Reels - International Baitcast Reel
Penn 965 Conventional Reels - International Baitcast Reel
Penn 975 Conventional Reels - International Baitcast Reel
Penn 975CS Conventional Reels - International Baitcast Reel
Penn 975CSLD Conventional Reels - International Baitcast Reel
Penn 975LD Conventional Reels - International Baitcast Reel
Penn TRQ100 Conventional Reels - International Torque Reel
Penn TRQ100LD Conventional Reels - International Torque Reel
Penn TRQ200 Conventional Reels - International Torque Reel
Penn TRQ300 Conventional Reels - International Torque Reel
Penn TRQ300LD Conventional Reels - International Torque Reel
Penn US113 Conventional Reels - Us Senator Conventional Reel
Penn US113N Conventional Reels - Us Senator Conventional Reel
Penn US113W Conventional Reels - Us Senator Conventional Reel