This is a genuine OEM part. The Penn click spring is made for use with Baitcast Reels, and is sold individually. The metal spring is fastened onto the click tongue and spool assembly, giving it the needed resistance. Although this spring is sold individually, two are necessary for the fishing reel. You will need a screwdriver for the installation.
Troubleshooting
This part works with the following brands:
Penn
This part works with the following products:
Conventional Reels
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed two thumb screws on side of reel, removed side of reel. Pulled spool out through open side of reel, then removed three small screws, to access clicker by removing side plate! Replaced broken spring! Greased springs, and assembled reel!
1. Remove crank side of reel
2. Remove spool
3. Remove the 3 small screws on the inside of the faceplate - this will allow you to access the
spring
4. Attached one side of the spring and then using a small jeweler\'s screwdriver, stretch and
attach the other end of the spring.
To reassemble th
... Read moree reel, reverse the order of steps 1-3.
Read less
Did you find this story helpful?
Thank you for voting!
Level wind gear was broken, clicker springs were worn/stretched out
Removed right side plates and spool, removed left side plate from frame, removed broken idler gear, cleaned side plate, new grease, replaced clicker springs, reattached left side plate to frame, drop of oil in the spool bearing, reinsert spool, attached right side plate, then tested. Easy, but the left side plates are small and require sm
... Read moreall thin six inch long screwdriver.
Remove the side plate, remove the spool, remove the tiny screws from the opposite side plate. Replace the clicker and the springs, then reassemble. Make sure to re-grease parts.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18263527
Manufacturer Part Number: 1184035
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
