All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
15 - 30 mins
(1 rated repair)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Heater wouls start and run for about 30-60 seconds then automatically turn off. It would turn back on if I turned the powere off then on. But it would only run for a few seconds then turn back off.
1. Removed control plate.
2. Removed top cover of heater.
3. Removed 2 screws from high limit control. Used pliers to pull tabs (I did not want to break wire connectors). Placed wires onto new high limit control then screwed control backnin place.
4. Removed screws holding flame control assembly. Pulled one wire off at
... Read morea time with pliers, hooking each wire to new assembly one at at time as they are removed. Secured new assemly to heater with screws.
5. Replaced top cover and secured with screws.
6. Replaced control panal with screws.
7. Heater now stays on until desired temperature (using thermostat knob).
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10369012
Manufacturer Part Number: 22105
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
